786464
12
Zoom out
Zoom in
Previous page
1/149
Next page
12 | English
(3) Chisel adjustment ring (Vario Lock)
(4) Lock-on button for on/off switch
(5) On/off switch
(6) Handle (insulated gripping surface)
(7) Auxiliary handle (insulated gripping surface)
(8) Knurled nut for auxiliary handle
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
Technical Data
Demolition hammer GSH 5
Article number 3611C387..
Rated power input W 1100
Impact rate min-1 2900
Chisel positions 12
Impact energy per stroke
according to EPTA-Proced-
ure 05:2016
J 7.5
Tool holder SDS max
Lubrication Grease lubrication
Weight according to EPTA-
Procedure 01:2014 kg 5.8
Protection class / II
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
ENIEC62841-2-6.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 89dB(A); sound power level
100dB(A). Uncertainty K=3dB.
Wear hearing protection
Vibration total values ah (triax vector sum) and uncertainty K
determined according to ENIEC62841-2-6:
Chiselling: ah=15.5m/s2, K=1.5m/s2
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
uPull the plug out of the socket before carrying out any
work on the power tool.
Auxiliary handle (see figure A)
uDo not operate your power tool without the auxiliary
handle (7).
You can swivel the auxiliary handle (7) to any angle for a safe
work posture that minimises fatigue.
Loosen the knurled nut (8), rotate the auxiliary handle (7)
around the axis of the tool to the required position and
retighten the knurled nut (8).
Changing the Tool
With the SDS-max tool holder, you can change the applica-
tion tool simply and easily without additional aids.
The dust protection cap (1) largely prevents the penetration
of drilling dust into the tool holder during operation. When
inserting the tool, make sure that the dust protection cap (1)
does not become damaged.
uReplace a damaged dust protection cap immediately.
It is recommended that you have use an after-sales
service for this.
Inserting the application tool (see figure B)
Clean and lightly grease the shank of the application tool.
Push the locking sleeve (2) back and insert the applica-
tion tool by turning it into the tool holder. Release the
locking sleeve (2) to lock the application tool.
Check the latching by pulling the tool.
Removing the application tool (seefigureC)
Push the locking sleeve (2) back and remove the applica-
tion tool.
Dust/Chip Extraction
Dust from materials such as lead-containing coatings, some
wood types, minerals and metal can be harmful to one’s
health. Touching or breathing-in the dust can cause allergic
reactions and/or lead to respiratory infections of the user or
bystanders.
Certain dust, such as oak or beech dust, is considered carci-
nogenic, especially in connection with wood-treatment ad-
ditives (chromate, wood preservative). Materials containing
asbestos may only be worked by specialists.
Provide for good ventilation of the working place.
It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the ma-
terials to be worked.
1 609 92A 7CA | (29.07.2022) Bosch Power Tools
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSH 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSH 5 in the language / languages: All languages as an attachment in your email.

The manual is 4.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info