78622
11
Zoom out
Zoom in
Previous page
1/63
Next page
English - 1
The machine is intended for chiselling work in
concrete, brick, stone and asphalt as well as for
driving and compacting with appropriate acces-
sories.
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
1 Dust protection cap
2 Locking sleeve
3 Chisel adjusting ring (Vario-lock)
4 Vibration damper
5 On/Off switch
6 Impact rate control
7 Service indicator
8 Stand-by-indicator
9 Auxiliary handle
Not all of the accessories illustrated or described are
included as standard delivery.
Measured values determined according to
EN 60 745.
Typically the A-weighted noise levels of the ma-
chine are: sound pressure level 90 dB (A); sound
power level 101 dB (A). Measurement
uncertainty K = 3 dB.
Wear hearing protection!
Overall vibrational value (vector sum of three di-
rections) determined according to EN 60 745:
Chiselling: Vibrational emission value a
h
=15 m/s
2
,
uncertainty K=2 m/s
2
.
The vibration emission level
given in this information sheet
has been measured in accordance with a stand-
ardised test given in EN 60745 and may be used
to compare one tool with another.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this infor-
mation sheet. This could lead to a significant un-
derestimate of exposure when the tool is used
regularly in such a way.
NOTE: To be accurate, an estimation of the level
of exposure to vibration experienced during a
given period of work should also take into ac-
count the times when the tool is switched off and
when it is running but not actually doing the job.
This may significantly reduce the exposure level
over the total working period.
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
Additionally, the general safety instructions either
in the enclosed booklet or those added in the
centre of these operating instructions must be ob-
served.
SAVE THESE INSTRUCTIONS.
When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
securely than by hand.
Do not work materials containing asbes-
tos. Asbestos is considered carcinogenic.
Tool Specifications
Demolition
Hammer
GSH 5 E
PROFESSIONAL
Article number 0 611 318 7..
Rated power input [W] 1 100
Impact rate [bpm] 2 900
Impact energy per
stroke
[J] 2 12
Chisel positions 12
Chiselling capacity
in concrete of
medium hardness
[kg/h] 180
Tool holder SDS-max
Lubrication Oil lubrication
Weight according to
EPTA-Procedure
01/2003
[kg] 5.4
Protection class / II
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may
vary.
The values given are valid for nominal voltages [U] of 230/
240 V. For lower voltages and models for specific coun-
tries, these values can vary.
Intended Use
Product Features
Noise/Vibration Information
For Your Safety
WARNING
1 619 929 E43.book Seite 1 Montag, 27. Februar 2006 1:24 13
11 1 619 929 E43 TMS 15.02.06
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSH 5 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSH 5 E in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info