78348
14
Zoom out
Zoom in
Previous page
1/77
Next page
14 | English 1 619 929 711 13.7.06
Technical Data
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Handle
2 On/Off switch
3 Carrying handle
4 Knurled nut for carrying handle
5 Limit bolt (GSH 16-30)
6 Tool retainer (GSH 16-28)
7 Tool shank
8 Tool holder
9 Shoulder
The accessories illustrated or described are not
included as standard delivery.
Noise/Vibration Information
Measured values determined according to
2000/14/EG and EN 60745.
Typically the A-weighted noise level of the machine is:
sound pressure level 92 dB(A); sound power level
103 dB(A). Uncertainty K=2 dB.
Wear hearing protection!
Overall vibrational values (vector sum of three direc-
tions) determined according to EN 60745:
Chiselling: Vibration emission value a
h
=10 m/s
2
,
uncertainty K=2 m/s
2
.
The vibration emission level given in
this information sheet has been meas-
ured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with
another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information sheet.
This could lead to a significant underestimate of expo-
sure when the tool is used regularly in such a way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given period
of work should also take into account the times when
the tool is switched off and when it is running but not
actually doing the job. This may significantly reduce the
exposure level over the total working period.
Declaration of Conformity
We declare under our sole responsibility that this prod-
uct is in conformity with the following standards or
standardization documents: EN 60745 according to
the provisions of the directives 89/336/EEC,
98/37/EC, 2000/14/EC.
2000/14/EC: The guaranteed sound power level L
WA
is below 105 dB(A). The valuation procedure for the
conformity is in accordance with appendix VI.
Designated testing authority:
TÜV NORD CERT GmbH & Co. KG,
Am TÜV 1, 30519 Hannover
Leinfelden, 30.06.2006
Robert Bosch GmbH, Power Tools Division
D-70145 Leinfelden-Echterdingen
Demolition Hammer GSH 16-28
PROFESSIONAL
GSH 16-30
PROFESSIONAL
Article number 3 611 C35 0.. 3 611 C35 1..
Rated power input W 1750 1750
Impact rate bpm 1300 1300
Impact energy per stroke J 45 45
Tool holder mm 28 30
Weight according to EPTA-Procedure
01/2003 kg 17.9 16.5
Protection class /II /II
The values given are valid for nominal voltages [U] of 230/240 V. For lower voltage and models for specific countries, these val-
ues can vary.
Please observe the article number on the type plate of your machine. The trade names of the individual machines may vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable
mains system conditions. Malfunctions are not to be expected for system impedances below 0,25 ohm.
WARNING
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-205-001.book Page 14 Thursday, July 13, 2006 8:42 AM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSH 16-30 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSH 16-30 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info