786165
11
Zoom out
Zoom in
Previous page
1/187
Next page
English | 11
uOnly carry out work with a fitted chip deflector. Make
sure that the chip deflector is not damaged or bent out
of shape. Working without a chip deflector or with a dam-
aged chip deflector poses a risk of injury. Have a dam-
aged chip deflector replaced immediately by an author-
ised after-sales service centre for Bosch power tools.
uWear protective gloves during work. Make sure that
cut sheet parts are not bent towards your body. Sharp
burrs develop on cut sheets; these can cause injury.
When necessary and while wearing gloves, press bending
sheet parts away from your body.
uIn case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
uDo not open the battery. There is a risk of short-circuit-
ing.
uThe battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
uOnly use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for cutting sheet metals without
incurring any loss from chipping. It is suitable for straight
and curved cuts.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Batterya)
(2) Battery release buttona)
(3) On/off switch
(4) Chip deflector
(5) Handle (insulated gripping surface)
(6) Fastening screw for upper cutter
(7) Upper cutter
(8) Bottom cutter
(9) Set screw for bottom cutter
(10) Fastening screw for bottom cutter
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless metal shears GSC 18V-16
Article number 3601J262..
Rated voltage V= 18
No-load stroke rate n0min−1 3400
Max. steel sheet cutting
capacityA) mm 1.6
Smallest curve radius mm 15
Weight according to
EPTA-Procedure 01:2014 kg 2.0–3.0B)
Recommended ambient tem-
perature during charging °C 0 to +35
Permitted ambient temperat-
ure during operationC) and
during storage
°C −20 to +50
Recommended batteries GBA 18V…
ProCORE18V…
Recommended chargers GAL 18…
GAX 18…
GAL 36…
A) Refers to steel sheets of up to 400N/mm2
B) Depends on battery in use
C) Limited performance at temperatures <0°C
Noise/Vibration Information
Noise emission values determined according to
EN62841‑2‑8.
Typically, the A-weighted sound pressure level of the power
tool is 71dB(A). Uncertainty K=3dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN62841‑2‑8:
ah=8m/s2, K=1.5m/s2.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
Bosch Power Tools 1 609 92A 6N6 | (08.12.2021)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSC 18V-16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSC 18V-16 in the language / languages: All languages as an attachment in your email.

The manual is 2.61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info