786456
16
Zoom out
Zoom in
Previous page
1/115
Next page
16 | English
Impact drill GSB 19-2 REA
Steel mm 13/8
Wood mm 40/25
Chuck capacity mm 1.5–13
Suction capacity l/min 460
Dust box capacity (for level drilling)
Drill holes, 6x30mm pc. 130
Drill holes, 8x30mm pc. 75
Drill holes, 10x30mm pc. 45
Weight according to
EPTA-Procedure 01:2014
with dust extraction at-
tachment kg 3.2
without dust extraction at-
tachment kg 2.6
Protection class / II
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Noise emission values determined according to
EN62841-2-1.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 99dB(A); sound power level
110dB(A). Uncertainty K=5dB.
Wear hearing protection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN62841-2-1.
Drilling into metal: ah=3.5 m/s2, K=1.5 m/s2.
Impact drilling into concrete: ah=17 m/s2, K=1.5 m/s2.
Screwdriving: ah<2.5m/s2, K=1.5m/s2.
Thread cutting: ah<2.5 m/s2, K=1.5 m/s2.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
uPull the plug out of the socket before carrying out any
work on the power tool.
Auxiliary Handle
uDo not operate your power tool without the auxiliary
handle (10).
You can adjust the auxiliary handle (10) to any of 12 posi-
tions in order to achieve a safe work posture that minimises
fatigue.
Turn the lower gripping end of the auxiliary handle (10) in
rotational direction and push the auxiliary handle (10) for-
ward until you can swivel it into the required position. Then
pull the auxiliary handle (10) back again and turn the lower
gripping end in rotational direction to tighten it.
Setting the drilling depth (see figure A)
You can use the depth stop (17) to set the required drilling
depthX.
Turn the lower gripping end of the auxiliary handle (10) anti-
clockwise and set the depth stop (17).
Pull the depth stop(17) far enough out that the distance
between the drill bit tip and the edge of the depth stop(17)
corresponds to the required drilling depth X.
Then turn the lower gripping end of the auxiliary handle (10)
clockwise to retighten it.
The fluting on the depth stop (17) must face upwards.
Changing the tool
uWear protective gloves when changing tools. The drill
chuck may heat up significantly when it is used for long
periods.
Keyless chuck (see figure B)
The drill spindle is locked when the on/off switch (7) is not
pressed. This makes it possible to change the application
tool in the drill chuck quickly, conveniently and easily.
Open the keyless chuck (1) by turning it in the direction of
rotation until the tool can be inserted. Insert the tool.
Firmly tighten the sleeve of the keyless chuck (1) by turning
it by hand in the rotational direction until it stops clicking.
This will automatically lock the drill chuck.
The lock will disengage again if you turn the sleeve in the op-
posite direction to remove the tool.
Keyed chuck (see figure C)
Open the keyed chuck (21) by turning it until the tool can be
inserted. Insert the tool.
Insert the chuck key (20) into the corresponding holes of the
keyed chuck (21) and clamp the tool evenly.
Screwdriving tools
You should always use a universal bit holder (19) when using
screwdriver bits (18). Only use screwdriver bits that fit the
screw head.
For screwdriving, make sure the "drilling/impact drilling" se-
lector switch (3) is always set to the "drilling" symbol.
1 609 92A 7YS | (31.05.2022) Bosch Power Tools
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSB 19-2 REA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSB 19-2 REA in the language / languages: All languages as an attachment in your email.

The manual is 3.85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info