Manual Bosch GSA 900 E (page 18 of 208) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

110212

Zoom out

Zoom in

1/208

18 | English

1 609 929 N64 | (28.1.08) Bosch Power Tools

Ejecting the Saw Blade (see figure A)

Turn the SDS lever 3 by approx. 180° in clock-

wise direction and pull out the saw blade 1.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Use dust extraction whenever possible.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Operation

Operating Modes

f Before any work on the machine itself, pull

the mains plug.

Turning the Rotating Collar (see figure B)

For certain jobs, the rotating collar 7 can be

turned. Push the release button for the collar 8

to the rear and turn the rotating collar 7 to the

required position.

The position of the rotating collar 7 can be

locked in 90° steps. For this, turn the rotating

collar 7 until the mark on the rotating collar 7 is

in alignment with the mark on the release but-

ton 8. Push the release button for the collar 8 to-

ward the front.

Pivoting Footplate (see figure C)

Due to its movability, the adjustable footplate 2

adapts to the required angular position of the

surface.

Utility Hook (see figure D)

Your tool is equipped with a utility hook 9 for

hanging it, e. g., to a ladder, etc. Simply fold out

the utility hook 9 to the required position.

f When the tool is hanging by the utility hook,

ensure that the saw blade is protected

against unintended contact. Danger of inju-

ry.

Fold the utility hook 9 back in again when you

are ready to continue working.

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Switching On and Off

To start the machine, press the On/Off switch

10 and keep it depressed.

To switch off the machine, release the On/Off

switch 10.

Controling the Stroke Rate

Increasing or reducing the pressure on the

On/Off switch 10 enables stepless stroke-rate

control of the switched-on machine.

The required stroke rate is dependent on the

material and the working conditions and can be

determined by a practical trial.

Reducing the stroke rate is recommended when

the saw blade engages in the material as well as

when sawing plastic and aluminium.

OBJ_BUCH-68-003.book Page 18 Monday, January 28, 2008 11:32 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSA 900 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GSA 900 E Manual

Product: