786103

Bosch GSA 12V-14 Professional Manual

14
Zoom out
Zoom in
Previous page
1/209
Next page
14 | English
(12) Saw blade receptacle
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw GSA 12V-14
Article number 3601F4L9..
Rated voltage V= 12
No-load stroke rate n₀ min−1 0–3000
Tool holder SDS
Stroke mm 14.5
Max. cutting depth
– in wood mm 65
– in steel (unalloyed) mm 8
– Pipe diameter mm 50
Weight according to EPTA-Pro-
cedure 01:2014 kg 1.2–1.4A)
Recommended ambient tem-
perature during charging °C 0to+35
Permitted ambient temperature
during operationB) and during
storage
°C −20to+50
Recommended rechargeable
batteries GBA12V…
Recommended battery chargers GAL12…
GAX18…
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/vibration information
Noise emission values determined according to
EN62841‑2‑11.
Typically, the A-weighted sound pressure level of the power
tool is 70dB(A). Uncertainty K = 5dB. The noise level when
working can exceed the volume stated. Wear hearing pro-
tection!
Vibration total values ah (triax vector sum) and uncertainty K
determined according to EN62841‑2‑11:
Cutting boards with saw blade S511DF:
ah,B=6m/s2, K=1.5m/s2,
Cutting wooden beams with saw blade S511DF:
ah,WB=6.5m/s2, K=1.5m/s2.
(The specifications for cutting boards apply to a workpiece
thickness of 20mm.)
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Battery Charging (see figureA)
uUse only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging process
does not damage the battery.
The lithium-ion battery is protected against deep discharge
by the "Electronic Cell Protection (ECP)". When the battery
is discharged, the power tool is switched off by means of a
protective circuit: The application tool no longer rotates.
uDo not continue to press the On/Off switch after the
power tool has automatically switched off. The battery
can be damaged.
To remove the battery (4), press the release button (5) and
pull the battery downwards out of the power tool. Do not
use force to do this.
Battery charge-control indicator
When the on/off switch (7) is pressed in halfway or com-
pletely, the battery charge indicator (10) indicates the bat-
tery's state of charge for several seconds. The indicator con-
sists of three green LEDs.
LED Capacity
Continuous lighting 3 x green ≥2/3
Continuous lighting 2 x green ≥1/3
Continuous lighting 1 x green <1/3
Flashing light 1 x green Reserve
If no LED lights up after pressing the on/off switch (7), then
the battery is defective and must be replaced.
1 609 92A 81C | (21.07.2022) Bosch Power Tools
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GSA 12V-14 Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GSA 12V-14 Professional in the language / languages: All languages as an attachment in your email.

The manual is 4.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info