544257
10
Zoom out
Zoom in
Previous page
1/153
Next page
10 | English
1 609 92A 0HJ | (4.11.13) Bosch Power Tools
Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting ac-
cessory contacting a “live” wire may make exposed metal
parts of the power tool “live” and could give the operator an
electric shock.
Switch off the power tool immediately when the tool in-
sert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
— the power tool is subject to overload or
— it becomes wedged in the workpiece.
Do not mix food. Power tools and their accessories are not
designed for processing food.
Keep the cord away from the working area. The cord
may be entangled by the stirrer paddle.
The mixing container must be suitable for mixing and
must stand securely. A container that is not properly se-
cured may move uncontrolled.
Ensure that no liquid splashes against the housing of
the power tool. Liquid that has penetrated the power tool
can cause damage and lead to electric shock.
Follow the instructions and warnings in the Material
Safety Data Sheets (MSDS) of the material to be mixed.
Material to be mixed may be harmful.
In the event of a power interruption, release the lock-
ing switch by pressing the on/off switch. This will pre-
vent the power tool from restarting unintentionally (risk of
injury).
Do not use the power tool in a stand.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for mixing pulverised building mate-
rials such as mortar, plaster, adhesives, as well as solvent-
free paint, varnish and similar substances.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Gear selector(GRW 18-2 E)
2 On/Off switch
3 Lock-on button for On/Off switch
4 Drive spindle
5 Stirrer paddle*
6 Handle (insulated gripping surface)
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Stirrer/Mixer GRW 12 E GRW 18-2 E
Article number
3 601 AA7 0.. 3 601 AA8 0..
Rated power input
W12001800
Output power
W7801170
Gear selection, mechanical
No-load speed
–1st gear
–2nd gear
min
-1
min
-1
0 – 1000
0–450
0 1050
Rated speed
–1st gear
–2nd gear
min
-1
min
-1
0–620
0–250
0–580
Rated torque
–1st gear
–2nd gear
Nm
Nm
12
45
19
Tool holder M14 M14
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-1972-003.book Page 10 Monday, November 4, 2013 2:14 PM
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GRW 18-2 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GRW 18-2 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info