544114

Bosch GRO 10.8 V-LI Manual

19
Zoom out
Zoom in
Previous page
1/238
Next page
English | 19
Bosch Power Tools 1 619 P11 460 | (26.11.13)
Certain dusts, such as oak or beech dust, are considered
as carcinogenic, especially in connection with wood-treat-
ment additives (chromate, wood preservative). Materials
containing asbestos may only be worked by specialists.
– Provide for good ventilation of the working place.
– It is recommended to wear a P2 filter-class respirator.
Observe the relevant regulations in your country for the
materials to be worked.
Prevent dust accumulation at the workplace. Dusts can
easily ignite.
Operation
Starting Operation
Inserting the battery
– Insert the charged battery 9 into the battery port until it
can be felt to engage and is seated flush.
Switching On and Off
To save energy, only switch the power tool on when using it.
–To start the power tool, push the On/Off switch 6 for-
wards.
–To switch off the machine, push On/Off switch 6 toward
the rear.
Adjusting the Speed
The speed regulator 7 enables continuously variable adjust-
ment of the speed of the power tool even during operation.
– When working with plastics and other materials with a low
melting point, use low speeds.
– Perform cutting work in wood, iron or steel at high speeds.
– When polishing, buffing and cleaning, work with speeds of
up to max. 15000 rpm in order to avoid damaging the
workpiece and application tool.
Working Advice
Detailed work can be carried out best if you hold the power
tool as a pen between thumb and index finger (see figure F).
For heavy work such as cutting or grinding, use the “golf grip
method” (see figure G).
Move the cutting disc or grinding accessory with light pres-
sure to achieve an optimum work result. Too much pressure
will reduce the performance of the power tool and lead to fast-
er wear of the application tool.
Ensure that grinding tools and cutting discs are pro-
tected against impact when stored.
Recommended Cutting Methods
– Panel materials (see figure H)
–Bars (seefigureI)
– Pipes (see figure J)
Blockage protection
The built-in blockage protection protects the motor and bat-
tery in case of a blockage. If the application tool becomes
jammed in the workpiece or if too much pressure is exerted on
the workpiece, the motor will stop.
– Determine the cause of the blockage and correct it.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself (e. g. mainte-
nance, tool change, etc.) as well as during transport
and storage, remove the battery from the power tool.
There is danger of injury when unintentionally actuating
the On/Off switch.
For safe and proper working, always keep the machine
and ventilation slots clean.
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: (0844) 7360109
Fax: (0844) 7360146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Speed setting Speed control adjustment
1 5000 –8000 min
-1
2 9000 –12000 min
-1
3 16000 –19000 min
-1
4 20000 –24000 min
-1
5 24000 –28000 min
-1
6 30000 –35000 min
-1
OBJ_BUCH-2020-001.book Page 19 Tuesday, November 26, 2013 2:57 PM
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GRO 10.8 V-LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GRO 10.8 V-LI in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info