Manual Bosch Greensource Hydrolight - Hydrocomfort (page 16 of 20) (English)

809325

Zoom out

Zoom in

1/20

FACTORY SETTINGS

6 720 806 630 (2013/02)16

14 FACTORY SETTINGS

14.1 FACTORY SETTINGS

The tables show the values which have been preset at the factory (F

value). These values can be modified by the user =[0] via user levels

Menu and Advanced.

The installer can access the items in the installation and service menu

=[1] listed in the following table after changing the access level under

Menu or Advanced menu. Only the items which are identified with a [0]

are accessible to the user.

Cooling function is not available in this product, so any

reference to this in the menus can be disregarded.

Menu Level F value

Fast restart of heat pump 1No

Start up

_”_\Setting the clock

_”_\_”_\Set date 1yy-mm-dd

_”_\_”_\Set time 1 hh:mm:ss

_”_\T1 maximum set point value 145 °C

_”_\External input

_”_\_”_\Activated if 1 Closed

_”_\_”_\Change in temperature 1 0 °C

_”_\_”_\Stop hot water loading 1No

_”_\_”_\Stop heating production 1 No

_”_\_”_\Additional heat only 1 No

_”_\_”_\Limit electrical capacity to 1 3/3

_”_\_”_\External blocking 1No

_”_\_”_\Safety thermostat 1 No

_”_\_”_\Stop additional heat hot water 1No

_”_\_”_\Stop additional heat radiators 1 No

_”_\Lowest outdoor temperature 1-10 °C

_”_\Accessory board function 1 No

_”_\Max limit E12.T1 Set point value 145 °C

_”_\Connected extra sensors

_”_\_”_\ T3 acknowledged 1Yes

_”_\_”_\T5 acknowledged (T5) 1 Yes

_”_\Manual operation 1No

_”_\Operating mode, additional heater

_”_\_”_\Additional heat only 1 No

_”_\_”_\Block additional heat 1 No

_”_\Correct sensor 1 0

_”_\Anti-jamming mode time 1 02:00

_”_\Alarm buzzer interval 11 min

_”_\Display

_”_\_”_\Contrast 0 27

_”_\_”_\Brightness 0 100

_”_\System pressure sensor connected 1Yes

_”_\Operation alternative G2 1 Continuous

Room temperature setting (T5) 020°C

Room temperature setting, heating system 2 020°C

Extra hot water 0 0 h

Table 4 Menu

Advanced menu Level F value

Heating/cooling

_”_\Minimum outdoor temperature of heat

curve

1–10 °C

_”_Heating system temperature

_”_\_”_\Heat curve 0V=20.0 °C

H=35.0 °C

_”_\_”_\Hysteresis

_”_\_”_\_”_\Quick acceleration 15.0 °C

_”_\_”_\_”_\Quick brake 1 1.0 °C

_”_\_”_\_”_\Quick stop 110.0 °C

_”_\_”_\_”_\Integration time 1 60°min

_”_\_”_\_”_\Rad brake temp increase 11.0 °C

_”_\_”_\_”_\Rad brake time 1 0 min

_”_\Room sensor setting

_”_\_”_\Room temperature setting 0 20 °C

_”_\_”_\Room sensor interval 0 3K

_”_\_”_\Room sensor influence

_”_\_”_\_”_\Change factor 02.0

_”_\_”_\Blocking time 0 4 hrs

_”_\Time limited settings

_”_\_”_\Time control heating

_”_\_”_\_”_\Day and time 0Off

_”_\_”_\_”_\Change in temperature 0 –10 °C

_”_\_”_\Holiday

_”_\_”_\_”_\Date 0 Off

_”_\_”_\_”_\Change in temperature 0-10 °C

_”_\_”_\External input

_”_\_”_\_”_\Activated if 1Closed

_”_\_”_\_”_\Change in temperature 0 0 °C

_”_\Heating season

_”_\_”_\Heating season limit 0 18 °C

_”_\_”_\Delay 04hrs

_”_\_”_\Direct start limit 0 10 °C

_”_\Heating, maximum operating time at hot

water demand

020 min

_”_\Shut down protection, change over hot

water to heating

1 300 s

_”_\Maximum speed compressor 1 7

_”_\Quick acceleration time 1 15 min

_”_\Quick brake time 15min

Table 5 Advanced menu

Advanced menu Level F value

_”_\Temperature heating system 2

_”_\_”_\Heat curve 0V=20.0 °C

H=35.0 °C

_”_\_”_\Room sensor settings

_”_\_”_\_”_\Room temperature setting 020 °C

_”_\_”_\_”_\Room sensor influence

_”_\_”_\_”_\_”_\Change factor 05,0

_”_\_”_\_”_\_”_\Blocking time 0 4 hrs

_”_\_”_\Time limited settings

_”_\_”_\_”_\Time control heating

_”_\_”_\_”_\_”_\Day and time 0Off

_”_\_”_\_”_\_”_\Change in temperature 0 -10 °C

Table 6 Advanced menu

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch Greensource Hydrolight - Hydrocomfort in the language / languages: English as an attachment in your email.

The manual is 1.66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch Greensource Hydrolight - Hydrocomfort Manual

Product: