Manual Bosch GOP 250 CE Professional (page 17 of 217) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

593438

Zoom out

Zoom in

1/217

English | 17

Bosch Power Tools 2 609 932 934 | (8.10.14)

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:

Dust/Chip Extraction

 Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

– As far as possible, use a dust extraction system suitable

for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the mate-

rials to be worked.

 Prevent dust accumulation at the workplace. Dusts can

easily ignite.

Connecting the Dust Extraction (see figure A)

For sanding, always connect the dust extraction.

Remove the application tool/accessory when mounting the

dust extraction 16 (accessory).

If required, assemble the parts of the dust extraction 16 as

shown in the figure. Position the assembled dust extraction

onto the machine via the tool holder 4. Turn the dust extrac-

tion in such a manner that the cams of the dust extraction en-

gage into the corresponding recesses on the housing. Fasten

the dust extraction to the machine with the retaining clip 14

as shown in the figure.

Pay attention that the felt ring 13 is undamaged and faces

tightly against the sanding plate 10. Replace a damage felt

ring immediately.

Depending on the machine model, place a vacuum hose 17

(accessory) either directly onto the vacuum connection 15 or

cut off the old hose end, screw the extraction adapter 18 (ac-

cessory) onto the hose end and insert it directly into the vac-

uum connection 15. Connect the vacuum hose 17 with a vac-

uum cleaner (accessory). An overview for the connection of

various vacuum cleaners can be found at the end of these in-

structions.

The vacuum cleaner must be suitable for the material being

worked.

When vacuuming dry dust that is especially detrimental to

health or carcinogenic, use a special vacuum cleaner.

Operation

 Observe correct mains voltage! The voltage of the pow-

er source must agree with the voltage specified on the

nameplate of the machine. Power tools marked with

230 V can also be operated with 220 V.

Starting Operation

Switching On and Off

To start the machine, push the On/Off switch 1 forward so

that the “I” is indicated on the switch.

To switch off the machine, push the On/Off switch 1 toward

the rear so that the “0” is indicated on the switch.

To save energy, only switch the power tool on when using it.

Preselecting the Orbital Stroke Rate

With the thumbwheel for preselection of the orbital stroke

rate 2, you can preselect the required orbital stroke rate, even

during operation.

Sanding disc Material Application Grain size

–All wooden materials

(e. g., hardwood, soft-

wood, chipboard, build-

ing board)

–Metal materials

For coarse-sanding, e. g. of rough, unplaned beams and

boards

coarse 40

For face sanding and planing small irregularities medium 80

100

120

For finish and fine sanding of wood

fine 180

240

320

400

–Paint

–Varnish

– Filling compound

– Filler

For sanding off paint

coarse 40

For sanding primer (e. g., for removing brush dashes,

drops of paint and paint run)

medium 80

100

120

For final sanding of primers before coating

fine 180

240

320

400

OBJ_BUCH-1271-005.book Page 17 Wednesday, October 8, 2014 11:11 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GOP 250 CE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GOP 250 CE Professional Manual

Product: