Manual Bosch GOL 32 G Professional (page 10 of 144) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

592017

Zoom out

Zoom in

1/144

10 | English

1 619 929 L41 | (18.6.12) Bosch Power Tools

Direct the telescope towards the levelling rod, if required with

help of the optical peep sight 2. Turn the focusing knob 16 un-

til the graduation field of the levelling rod appears sharp. Align

the crosshair exactly with the centre of the levelling rod by

turning the horizontal drive screw 14.

When the telescope is correctly focussed, the crosshair and

the image of the levelling rod must remain aligned when mov-

ing your eye behind the eyepiece.

Measuring Functions

Always set up the levelling rod exactly vertical. Direct the

aligned and focussed measuring tool against the levelling rod

in such a manner that the crosshair faces centrally against the

levelling rod.

Reading Off the Height

Read off the height of the levelling rod at the

centre line of the crosshair.

Height measured in the figure: 1.195 m.

Measuring a Distance

Centre the measuring tool above the point

from which on the distance is to be measured.

Read off the height of the levelling rod at the

top and bottom stadia lines. Multiply the differ-

ence of both heights by 100 to receive the dis-

tance from the measuring tool to the levelling

rod.

Distance measured in the figure:

(1.347 m – 1.042 m) x 100 = 30.5 m.

Measuring Angles

Centre the measuring tool above the point from which on the

angle is to be measured.

Direct the measuring tool against point A. Rotate the horizon-

tal circle 10 with the zero point toward the reference mark 9.

Then direct the measuring tool against point B. Read off the

angle at the reference mark 9.

GOL 20 D/GOL 26 D/GOL 32 D: Angle measured in the

example: 45°.

GOL 20 G/GOL 26 G/GOL 32 G: Angle measured in the

example: 45 gon.

Accuracy Check of the Measuring Tool

Check the levelling and indication accuracy of the measuring

tool each time before using and after longer transport of the

measuring tool.

Checking the Circular Bubble Vial

Align the measuring tool with the levelling screws 12 so that

the air bubble is positioned in the centre of the circular bubble

vial 7.

Rotate the telescope by 180°. When the air bubble is no long-

er in the centre of the circular bubble vial 7, the circular bub-

ble vial must be readjusted.

Readjusting the Circular Bubble Vial

Bring the air bubble of the circular bubble vial

7 in a position between the centre and the end

position of the check by turning the levelling

screws 12.

Using the Allen key 17, turn the adjusting screws 11 until the air

bubble is positioned in the centre of the circular bubble vial.

Check the circular bubble vial by rotating the telescope by

180°. If required, repeat the procedure or refer to an author-

ised Bosch after-sales service.

Checking the Compensator

After aligning and focussing the measuring tool, measure the

height at a reference point. Then press the lock button of the

compensator 8 and release again. Measure the height again at

the reference point.

If both heights do not exactly match, have the measuring tool

repaired by an authorised Bosch after-sales service.

Checking the Crosshair

A measuring distance of approx. 30 m is required for the

check. Set up the measuring tool in the centre and levelling

rods A and B at both ends of the measuring distance.

A B

30 m

– b

= d

OBJ_BUCH-1239-002.book Page 10 Monday, June 18, 2012 10:51 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GOL 32 G Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GOL 32 G Professional Manual

Product: