Manual Bosch GOF 1250 LCE Professional (page 15 of 230) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

593169

Zoom out

Zoom in

1/230

English | 15

Bosch Power Tools 1 609 92A 16H | (16.2.15)

If damaged, have the power tool repaired before use.

Many accidents are caused by poorly maintained power

tools.

 Keep cutting tools sharp and clean. Properly maintained

cutting tools with sharp cutting edges are less likely to bind

and are easier to control.

 Use the power tool, accessories and tool bits etc. in ac-

cordance with these instructions, taking into account

the working conditions and the work to be performed.

Use of the power tool for operations different from those

intended could result in a hazardous situation.

Service

 Have your power tool serviced by a qualified repair per-

son using only identical replacement parts. This will en-

sure that the safety of the power tool is maintained.

Safety Warnings for Routers

 Hold power tool by insulated gripping surfaces, be-

cause the cutter may contact its own cord. Cutting a

“live” wire may make exposed metal parts of the power tool

“live” and shock the operator.

 Use clamps or another practical way to secure and sup-

port the workpiece to a stable platform. Holding the

work by your hand or against the body leaves it unstable

and may lead to loss of control.

 The allowable speed of the router bit must be at least as

high as the maximum speed listed on the power tool.

Accessories that rotate faster than permitted can be de-

stroyed.

 Router bits or other accessories must fit exactly in the

tool holder (collet) of your machine. Routing bits that do

not fit precisely in the tool holder of the machine rotate ir-

regularly, vibrate heavily and can lead to loss of control.

 Apply the machine to the workpiece only when

switched on. Otherwise there is danger of kickback when

the cutting tool jams in the workpiece.

 Keep your hands away from the cutting area and the

cutting disc. Hold the auxiliary handle with your second

hand. When both hands hold the machine, they cannot be

injured by the cutting disc.

 Never cut over metal objects, nails or screws. The rout-

er bit can become damaged and lead to increased vibra-

tions.

 Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage or

may cause an electric shock.

 Do not use blunt or damaged router bits. Blunt or dam-

aged router bits cause increased friction, can become

jammed and lead to imbalance.

 When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for routing grooves, edges, profiles

and elongated holes as well as for copy routing in wood, plas-

tic and light building materials, while resting firmly on the

workpiece.

With reduced speed and with appropriate routing bits, non-

ferrous alloys can also be machined.

The light of this power tool (GOF 1250 LCE) is designed to il-

luminate the immediate work area of the power tool and is not

suitable for household room illumination.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 Right handle (insulated gripping surface)

2 Lock-on button for On/Off switch

3 Light ring (GOF 1250 LCE)

4 Tightening nut with collet

5 Router bit*

6 Spindle lock lever

7 Screw for parallel guide rods (2x)

8 Chip shield

9 Step buffer

10 Adjusting screws for step buffer

11 Guide plate

12 Seat for parallel guide rods

13 Base plate

14 Depth stop

15 Screw for depth stop fixing

OBJ_BUCH-2018-004.book Page 15 Monday, February 16, 2015 1:39 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GOF 1250 LCE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GOF 1250 LCE Professional Manual

Product: