786282
18
Zoom out
Zoom in
Previous page
1/315
Next page
18 | English
Service
uHave your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Tacker safety warnings
uAlways assume that the tool contains fasteners. Care-
less handling of the tacker can result in unexpected firing
of fasteners and personal injury.
uDo not point the tool towards yourself or anyone
nearby. Unexpected triggering will discharge the fastener
causing an injury.
uDo not actuate the tool unless the tool is placed firmly
against the workpiece. If the tool is not in contact with
the workpiece, the fastener may be deflected away from
your target.
uDisconnect the tool from the power source when the
fastener jams in the tool. While removing a jammed
fastener, the tacker may be accidentally activated if it is
plugged in.
uUse caution while removing a jammed fastener. The
mechanism may be under compression and the fastener
may be forcefully discharged while attempting to free a
jammed condition.
uDo not use this tacker for fastening electrical cables. It
is not designed for electric cable installation and may
damage the insulation of electric cables thereby causing
electric shock or fire hazards.
uUse suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
uIn case of damage and improper use of the battery, va-
pours may be emitted. The battery can set alight or ex-
plode. Ensure the area is well ventilated and seek medical
attention should you experience any adverse effects. The
vapours may irritate the respiratory system.
uDo not open the battery. There is a risk of short-circuit-
ing.
uThe battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
uOnly use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g. against
continuous intense sunlight, fire, dirt, water
and moisture. There is a risk of explosion and
short-circuiting.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for connecting work in roofing,
encasing and battening, as well as manufacturing wall and
ceiling elements, wood facades, pallets, wood fences, noise-
reduction walls and boxes.
Only the fasteners (nails, staples, etc.) specified in the
"Technical Data" table may be used.
Note: The power tool is not suitable for driving nails into
metal or concrete.
GNH18V-64M: Please do not use the power tool in contact
actuation mode with automatic return while working on scaf-
folding, ladders or other platforms and when a change of
working position is required. In this case, only use the single
actuation mode with backup sequence.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Workpiece protector
(2) Discharge lock-off
(3) Clamping lever for opening/closing the shot duct
(4) Thumbwheel for depth stop adjustment
(5) Trigger
(6) Battery release button
(7) Rechargeable battery
(8) Handle (insulated gripping surface)
(9) User interface
(10) Storage for workpiece protector
(11) Belt hook
(12) Magazine
(13) Magazine slider
(14) Nail pusher
(15) Outlet
(16) Nail stripa)
(17) Magazine spring
(18) On/off switch button (user interface)
(19) On/off switch status (user interface)
(20) Single actuation display (user interface)
(GNH18V-64M)
1 609 92A 81N | (01.08.2022) Bosch Power Tools
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GNH 18V-64 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GNH 18V-64 in the language / languages: All languages as an attachment in your email.

The manual is 6.35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info