592529
14
Zoom out
Zoom in
Previous page
1/159
Next page
14 | English
1 609 929 M22 | (8.10.07) Bosch Power Tools
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine itself, pull
the mains plug.
f For safe and proper working, always keep
the machine and ventilation slots clean.
Clean and lubricate the punch 5 and die 4 every
3 operating hours.
Change the punch and die in good time when
worn. Only sharp tools produce a good cutting
quality and make the machine last longer.
The punch 5 and the die 4 may not be reground.
Changing the Die
When the die is locked, loosen the locking screw
3 (see “Locking/Loosening the Die”, page 13).
Unscrew the screwed cap 2 using an open-end
spanner (size 30 mm). Pull the die 4 off.
Insert a new, well lubricated die 4. Tighten the
screw cap 2 again.
Changing the Punch
To change the punch 5, remove the die (see
“Changing the Die”, page 14).
Unscrew the hollow screw 6 and remove the
punch 5.
Insert a new, well lubricated punch 5 and
tighten it with the hollow screw 6. Fasten the
die again (see “Changing the Die”, page 14).
WARNING! Important instructions for con-
necting a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to
the following code:
Do not connect the blue or brown wire to the
earth terminal of the plug.
Important: If for any reason the moulded plug is
removed from the cable of this power tool, it
must be disposed of safely.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Accessories/Spare Parts
Die 4 (universal) . . . . . . . . . . . . 2 608 639 900
Punch 5:
For curved cuts . . . . . . . . . . 2 608 639 013
For straight cuts . . . . . . . . . 2 608 639 016
Universal . . . . . . . . . . . . . . . . 2 608 639 022
For corrugated and profiled sheet with a thick-
ness to 1.2 mm:
Die 4 . . . . . . . . . . . . . . . . . . . 2 608 639 021
Set (punch 5/die 4). . . . . . . 2 608 639 902
After-sales service and
customer assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
and information on spare parts can also be
found under:
www.bosch-pt.com
Our customer consultants answer your ques-
tions concerning best buy, application and ad-
justment of products and accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: SPT-Technical.de@de.bosch.com
OBJ_BUCH-236-002.book Page 14 Monday, October 8, 2007 11:54 AM
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GNA 2.0 Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GNA 2.0 Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info