The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
1Display
2Measuring button
3Button for grade measurement / calibration **
4Button for clearing the internal memory / On/Off **
5Minus button
6Button for result / timer function **
7Button for measured-value list / storage of constant **
8Button for function mode / basic settings **
9Positioning pin
10Button for selection of the reference level
11Plus button
12Button for length, area and volume measurement
13Bluetooth® button
14Cover, micro USB port
15Micro USB port
16Fixture for carrying strap
17Reception lens
18Laser beam outlet
191/4" thread
20Serial number
21Laser warning label
22QR-Code (product information)
23Charge connector
24Battery charger
25Micro USB cable
26Protective pouch
27Measuring rail*
,
***
28Locking lever for measuring rail
29Tripod*
30Laser viewing glasses*
31Laser target plate*
* The accessories illustrated or described are not included as
standard delivery.
** Keep button pressed to call up the extended functions.
***When operating the measuring tool in the measuring rail 27,
data transmission is not possible.
Display Elements
aMeasured-value lines
b“ERROR” indication
cResult line
dDigital vial / position of measured-value list entry
eMeasured-value list indicator
fMeasuring functions
Battery Charger
Article number2 609 120 4..
Charging time
approx. 3 h
Output voltage
5.0 V
Charging current
500 mA
Protection class
/II
Digital Laser RangefinderGLM 100 C
A) For measurements from the rear measuring-tool edge, the operating range increases the better the laser light is reflected from the surface of the
target (dispersive, not reflective) and the brighter the laser point is with respect to the ambient brightness (indoors, twilight). For distances greater
than 80 m, we recommend using a retroreflective target plate (accessory). For distances below 20 m, a retroreflective target plate should not be used,
as it can lead to measuring errors.
B) For measurements from the rear measuring-tool edge, 100 % reflectance of the target (e.g., a white-painted wall), weak backlight and 25°C oper-
ating temperature. Additionally, a deviation influence of ±0.05 mm/m must be taken into account.
C) For measurements from the rear measuring-tool edge, 10– 100 % reflectance of the target, strong backlight and – 10°C to +50°C operating tem-
perature. Additionally, a deviation influence of ±0.29 mm/m must be taken into account.
D) For measurements with the rear side of the unit as reference, the max. measuring range is ±60 °
E) After calibration at 0 ° and 90 ° with an additional grade error of ±0.01 ° /degree to 45 ° (max.).
F) In the continuous measurement function, the maximum operating temperature is +40°C.
G) At 25°C operating temperature
H) For a new and charged battery without display illumination, Bluetooth® and tone signal.
I) For Bluetooth® low-energy-devices, establishing a connection may not be possible, depending on model and operating system. Bluetooth® devices
must support the SPP profile.
Please observe the article number on the type plate of your battery charger. The trade names of individual battery chargers may vary.
Please observe the article number on the type plate of your measuring tool. The trade names of the individual measuring tools may vary.
The measuring tool can be clearly identified with the serial number 20 on the type plate.
Length measurement
Area/surface measurement
Volume measurement
Continuous measurement
Indirect height measurement
1
OBJ_BUCH-1956-002.book Page 22 Monday, July 1, 2013 11:28 AM
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Bosch GLM 100 C Professional at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Bosch GLM 100 C Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 16,52 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
