766858
11
Zoom out
Zoom in
Previous page
1/165
Next page
English | 11
Action Figure Page
Detaching the microfiber cloth
110mm
Cleaning the microfiber cloth
L165
Accessories M165
Initial Operation
Note: The battery is supplied partially charged. To ensure
capacity of the battery, completely charge the battery using
the battery charger before using your machine for the first
time.
The lithium-ion battery can be charged at any time without
reducing its service life. Interrupting the charging procedure
does not damage the battery.
The battery is protected against deep discharging.
When the battery is discharged, the machine will stop.
Battery Charging (see figures A and C)
Note: The micro-USB port (18) for connection of the micro-
USB cable (16) is in the handle.
When the battery charge is low, the charger level indicator
(4) flashes green.
When the charger level indicator (4) flashes red, the battery
must be charged. Turn the machine off and charge the bat-
tery.
Connect the machine to the charger (17) using the micro-
USB cable (16) provided. Plug the battery charger (17) into
the socket. The charging process begins.
During the charging procedure, the handle of the machine
warms up. This is normal.
The charger level indicator (4) continuously lights up red
during the charging procedure. When the battery is fully
charged, the charger level indicator (4) continuously lights
up green.
Disconnect the battery charger from the mains supply when
charging process ends.
Observe the notes for disposal.
Troubleshooting
Problem Possible Cause Corrective Action
Machine will not switch
on Battery discharged Recharge battery
Battery too hot/cold Allow to cool/warm
Restricted or no va-
cuum Suction head blocked Unblock suction head
Drain plug removed Replace drain plug
Machine turns itself off Battery too hot/cold Allow to cool/warm
Suction head blocked Unblock suction head
Water leaks from ma-
chine Spray applicator not mounted correctly Mount the spray applicator correctly
Battery will not charge Battery charger not connected correctly Check battery charger and USB cable connec-
tions
Battery too hot/cold Allow to cool/warm
Streaking on windows Wiper blade damaged Replace wiper blade (accessory)
Too much force applied Apply reduced force
Too little force applied Apply more force
Maintenance and Cleaning (see
figures J–K)
Always clean the product thoroughly after use.
Remove the suction head from the main body and rinse.
Whilst suction head (2) is removed from the machine, fill the
dirty water tank (7) via the suction head aperture to the max
line with clean, warm water. DO NOT fill the dirty water tank
(7) via the drain hole. Shake the machine and pour the water
out via the drain plug(8).
Maintenance of the suction head
Protect the suction head against damage during storage.
Prevent the wiper blade from touching paper or cardboard,
as this could damage the wiper blades polymer coating.
Spots or lines may be visible on the polymer coating. This is
normal and does not affect the cleaning performance.
Textiles
Microfiber cloths: 67% polyester, 14% polyamide, 19%
polypropylene
Bosch Power Tools F 016 L81 778 | (20.05.2020)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GlassVAC Solo Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GlassVAC Solo Plus in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info