786132
17
Zoom out
Zoom in
Previous page
1/275
Next page
English | 17
cuts”. Raise the lower guard by the retracting handle
and as soon as the blade enters the material, the lower
guard must be released.For all other sawing, the lower
guard should operate automatically.
uAlways observe that the lower guard is covering the
blade before placing the saw down on bench or
floor.An unprotected, coasting blade will cause the saw
to walk backwards, cutting whatever is in its path. Be
aware of the time it takes for the blade to stop after
switch is released.
Additional safety warnings
uDo not allow the chip ejector to come into contact with
your hands. You may be injured by rotating parts.
uDo not use the saw above the level of your head. Doing
so will mean you have inadequate control of the power
tool.
uUse suitable detectors to determine if there are hid-
den supply lines or contact the local utility company
for assistance. Contact with electric cables can cause
fire and electric shock. Damaging gas lines can lead to ex-
plosion. Breaking water pipes causes property damage.
uDo not operate the power tool when stationary . It is
not suitable for operation with a saw table.
uWhen performing plunge cuts which are not right-
angled, secure the guide plate of the saw so that it will
not shift sideways.In the event of a sideways shift, the
saw blade may become jammed, which could lead to kick-
back.
uDo not use HSS saw blades. Such saw blades can easily
break.
uDo not saw any ferrous metals. Hot chips may ignite the
dust extractor.
uIn case of damage and improper use of the battery, va-
pours may be emitted. Ensure the area is well-ventilated
and seek medical attention should you experience any ad-
verse effects. The vapours may irritate the respiratory
system.
uDo not open the battery. There is a risk of short-circuit-
ing.
uThe battery can be damaged by pointed objects such
as nails or screwdrivers or by force applied externally.
An internal short circuit may occur, causing the battery to
burn, smoke, explode or overheat.
uOnly use the battery with products from the manufac-
turer. This is the only way in which you can protect the
battery against dangerous overload.
Protect the battery against heat, e.g.
against continuous intense sunlight, fire,
water and moisture. There is a risk of explo-
sion.
uAlways wait until the power tool has come to a com-
plete stop before placing it down. The application tool
can jam and cause you to lose control of the power tool.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended use
The power tool is intended for making straight cuts in wood
with and against the grain and mitre cuts in wood while rest-
ing firmly against the workpiece.
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Battery
(2) Battery release button
(3) Lock-off button for on/off switch
(4) On/off switch
(5) Hex key
(6) Spindle lock button
(7) Base plate
(8) Fastening screw for parallel guide
(9) Scale for mitre/bevel angles
(10) Wing bolt for mitre/bevel angle preselection
(11) Cut mark 45°
(12) Cut mark 0°
(13) Protective guard
(14) Handle (insulated gripping surface)
(15) Battery charge indicator
(16) Temperature monitoring/overload protection indic-
ator
(17) Wing bolt for preselecting the cutting depth
(18) Cutting depth scale
(19) Adjusting lever for retracting blade guard
(20) Saw spindle
(21) Retracting blade guard
(22) Mounting flange
(23) Circular saw blade
(24) Clamping flange
(25) Clamping bolt
(26) “PowerLight” lamp
(27) Reference mark for mitre angle setting
(28) Fastening screw for dust extraction adaptera)
(29) Dust extraction adaptera)
(30) Dust extraction hosea)
(31) Reference mark for cutting depth setting
Bosch Power Tools 1 609 92A 7TA | (17.05.2022)
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GKS 12V-26 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GKS 12V-26 in the language / languages: All languages as an attachment in your email.

The manual is 6.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info