594780
7
Zoom out
Zoom in
Previous page
1/31
Next page
English - 2
After the application of the glue, the work pieces
should be pressed together until the glue sets. The
glued location is capable of supporting a load after
approx. 5 minutes.
Protruding glue remains can be removed with a
sharp knife after the glue has cooled.
Glued spots can be unglued by applying heat. The
glued spots can be painted.
Nozzle Replacement
Wear protective gloves.
Heat the unit for approx. 4 minutes. Change the nozzle
while warm. Hand-tighten the nozzle after changing it.
Touch the nozzle only on the heat protection
covering - the nozzle tip is hot!
Before any work on the unit itself, pull the
mains plug.
Do not try to remove the glue stick to the rear
out of the unit.
If the unit should fail despite the care taken in man-
ufacturing and testing procedures, repair should be
carried out by an after-sales service agent for Bosch
power tools.
In all correspondence and spare parts orders,
please always include the 10-digit order number
given on the nameplate of the unit.
WARNING! Important instructions for connect-
ing a new 3-pin plug to the 2-wire cable.
The wires in the cable are coloured according to the
following code:
Do not connect the blue or brown wire to the earth
terminal of the plug.
Important: If for any reason the moulded plug is re-
moved from the cable of this unit, it must be dis-
posed of safely.
Recycle raw materials instead of
disposing as waste
The unit, accessories and packaging
should be sorted for environmental-
friendly recycling.
These instructions are printed on recycled paper
manufactured without chlorine.
The plastic components are labelled for categorized
recycling.
Exploded views and information on spare parts
can be found under:
www.bosch-pt.com
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham-Uxbridge
Middlesex UB 9 5HJ
Service................................ +44 (0) 18 95 / 83 87 82
Advice line......................... +44 (0) 18 95 / 83 87 91
Fax ................................................ +44 (0) 18 95 / 83 87 89
Ireland
Beaver Distribution Ltd.
Greenhills Road
Tallaght-Dublin 24
Service...................................... +353 (0)1 / 414 9400
Fax ...................................................... +353 (0)1 / 459 8030
Australia and New Zealand
Robert Bosch Australia Pty. Ltd.
RBAU/SPT
1555 Centre Road
P.O. Box 66
3168 Clayton/Victoria
................................................ +61 (0)1 / 3 00 30 70 44
Fax ................................................ +61 (0)1 / 3 00 30 70 45
www.bosch.com.au
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 60 335 according
to the provisions of the directives 73/23/EEC,
89/336/EEC.
03
Dr. Egbert Schneider Dr. Eckerhard Strötgen
Senior Vice President Head of Product
Engineering Certification
Robert Bosch GmbH, Power Tools Division
Subject to change without notice
Maintenance and Cleaning
Environmental Protection
strain relief
live = brown
neutral = blue
To be fitted
by qualified
professional only
Service and
Customer Assistance
Declaration of Conformity
1 609 929 J27.book Seite 2 Mittwoch, 2. November 2005 10:09 10
7 1 609 929 J27 TMS 19.10.05
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GKP 200 CE Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GKP 200 CE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info