733410
12
Zoom out
Zoom in
Previous page
1/283
Next page
12 | English
1 609 92A 3EV | (16.5.17) Bosch Power Tools
The unit must not be operated by chil-
dren or juveniles. Children should be
supervised to ensure that they do not
play with the unit.
The unit may only be used by author-
ised persons who have received
training or have demonstrated their
ability to operate the unit.
Wear personal protective
equipment (PPE) e. g. safety
goggles, dust mask etc. to pro-
tect against water, particles and/or aer-
osols sprayed back from parts. Do not
inhale aerosols if self-priming from ex-
ternal sources. Such water can contain
disease-causing agents.
Do not use the appliance within the
range of persons unless they also
wear protective clothing.
Connecting to the mains
The voltage indicated on the rating
plate must correspond to the voltage
of the power source.
The operating voltage is 230 V AC,
(for non-European countries 220 V or
240 V, as applicable).
This is a class I unit and may only be
connected to properly earthed power
sources.
The electric supply installation shall
be made by a qualified electrician and
comply with IEC 60364-1.
We recommend that this equipment
is only connected into a socket which
is protected by a circuit-breaker that
would be actuated by a 30 mA residu-
al current.
Requirements for extension cords
and plugs
Warning: Inadequate extension cords
can be dangerous. The extension
cord must have an earth wire. Exten-
sion cord, plug and socket must be of
waterproof construction, protected
against splashed water and intended
for outdoor use. If in doubt, contact a
qualified electrician or the nearest
Bosch Service Centre.
The following wire dimensions are
recommended: Up to 20 m length,
2.5 mm2 wire diameter, up to 50 m
length 4.0 mm2 wire diameter.
If your plug is not suitable for your
socket outlets, it should be cut off
and an appropriate plug fitted in its
place by an authorized customer ser-
vice agent. In case of electric plug
with internal fuse, the replacement
plug should have the same fuse rat-
ings as the original plug. The severed
plug must be disposed of to avoid a
possible shock hazard and should
never be inserted into a mains socket
elsewhere.
Products sold in GB only: Your prod-
uct is fitted with an BS 1363/A ap-
proved electric plug with internal fuse
(ASTA approved to BS 1362).
Remove the plug from socket when-
ever the machine is left unattended
for any period.
Do not touch the plug or socket with
wet hands.
Do not pull plug while operating the
device.
OBJ_BUCH-2319-004.book Page 12 Tuesday, May 16, 2017 11:15 AM
12


Need help? Post your question in this forum.

Forumrules
1

Forum

bosch-ghp-5-55

Reset search

  • I have been using this machine but I do not know how much pressure it works on. Now it works under any amount of pressure And whether it is possible to reduce or increase the pressure
    any pressure change possible in the machine? Submitted on 25-5-2021 at 12:50

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GHP 5-55 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GHP 5-55 in the language / languages: All languages as an attachment in your email.

The manual is 20,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info