Manual Bosch GHO 12V-20 Professional (page 15 of 223) (All languages)

786104

Zoom out

Zoom in

1/223

English | 15

Technical data

Planer GHO 12V-20

Article number 3 601 EA7 0..

Rated voltage V 12

No-load speed min-1 14,500

Cutting depth

– optimum mm 0 – 1.0

– maximum mm 1.0 – 2.0

Rebating depth mm 0 – 17

Max. planing width mm 56

Weight according to

EPTA-Procedure 01:2014 kg 1.7 – 1.9 A)

Permitted ambient temperature

– during charging °C 0 to +45

– During operation B) and dur-

ing storage °C -20 to +50

Recommended batteries GBA 12V...

GBA 10.8V...

Recommended chargers AL 11.. CV

GAL 1110 CV

GAL 12.. CV

GAL 12V-..

GAX 18V-30

A) Depends on battery in use

B) Limited performance at temperatures <0°C

In unfavourable conditions, it is possible that the power tool may

switch itself off due to electrostatic discharge. After switching the

power tool back on again, it will work as intended.

Noise/vibration information

Noise emission values determined according to

EN62841-2-14.

Typically, the A-weighted sound pressure level of the power

tool is 79 dB(A). Uncertainty K = 3 dB. The noise level when

working can exceed 80 dB(A).

Wear hearing protection

Total vibration values ah (triax vector sum) and uncertainty K

determined according to EN62841-2-14:

ah <2.5 m/s2, K = 1.5 m/s2,

The vibration level and noise emission value given in these

instructions have been measured in accordance with a

standardised measuring procedure and may be used to com-

pare power tools. They may also be used for a preliminary

estimation of vibration and noise emissions.

The stated vibration level and noise emission value repres-

ent the main applications of the power tool. However, if the

power tool is used for other applications, with different ap-

plication tools or is poorly maintained, the vibration level

and noise emission value may differ. This may significantly

increase the vibration and noise emissions over the total

working period.

To estimate vibration and noise emissions accurately, the

times when the tool is switched off or when it is running but

not actually being used should also be taken into account.

This may significantly reduce vibration and noise emissions

over the total working period.

Implement additional safety measures to protect the oper-

ator from the effects of vibration, such as servicing the

power tool and application tools, keeping their hands warm,

and organising workflows correctly.

Fitting

uRemove the battery from the power tool before carry-

ing out work on the power tool (e.g. maintenance,

changing tool, etc.). The battery should also be re-

moved for transport and storage. There is risk of injury

from unintentionally pressing the on/off switch.

Battery Charging

uUse only the chargers listed on the accessories page.

Only these chargers are matched to the lithium-ion bat-

tery of your power tool.

Note: The battery is supplied partially charged. To ensure

full battery capacity, fully charge the battery in the charger

before using your power tool for the first time.

The lithium-ion battery can be charged at any time without

reducing its service life. Interrupting the charging process

does not damage the battery.

The lithium-ion battery is protected against deep discharge

by the "Electronic Cell Protection (ECP)". When the battery

is discharged, the power tool is switched off by means of a

protective circuit: The application tool no longer rotates.

uDo not continue to press the On/Off switch after the

power tool has automatically switched off. The battery

can be damaged.

Follow the instructions on correct disposal.

Removing the battery

To remove the battery (5), press the release button (6) and

pull the battery to the rear and out of the power tool. Do not

use force to do this.

Changing the Tool

The hex key (18) required for changing the planer blade is

housed inside the power tool and should always be stored

there (see figure F).

uTake care when changing the planer blade. Do not pick

up the planer blade by the cutting edges. You may be

injured by the sharp cutting edges.

Use only original Bosch HM/TC planer blades.

The hard metal (HM/TC) planer blade has two cutting edges

and can be turned. If both cutting edges become blunt, the

planer blade (17) needs to be changed. The HM/TC planer

blade must not be resharpened.

Removing the planer blade (see figure A)

To turn or replace the planer blade (17), turn the blade head

(19) until it is parallel to the adjustable planer base plate

(14).

Bosch Power Tools 1 609 92A 4LD | (19.02.2019)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GHO 12V-20 Professional in the language / languages: All languages as an attachment in your email.

The manual is 5.2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GHO 12V-20 Professional Manual

Product: