594778
11
Zoom out
Zoom in
Previous page
1/137
Next page
English | 11
Bosch Power Tools 1 609 929 X67 | (2.11.10)
en
Safety Notes
Read all safety warnings and all in-
structions. Failure to follow the warn-
ings and instructions may result in elec-
tric shock, fire and/or serious injury.
f Do not allow children to use the hot air gun
without supervision. Children can injur
themselves.
f Children or persons with mental or physical
limitations may only use the hot air gun un-
der supervision or after having been in-
structed. A thorough introduction reduces
operating errors and injuries.
f Be careful when working with the power
tool. The power tool produces intense heat
which can lead to increased danger of fire
and explosion.
f Exercise special care when working close to
inflammable materials. The hot air jet or the
hot nozzle can ignite dust or gases.
f Do not operate or work with the power tool
in areas where there is danger of explosion.
f Never direct the hot air jet at the same po-
sition for longer periods. Easily inflammable
gases can develop e.g., when working plas-
tic, paint, varnish or similar materials.
f Be aware that heat can be conducted to hid-
den covered materials and can ignite them.
f After using, place the power tool down in a
secure manner and allow it to cool down
completely before packing it away. The hot
nozzle can cause damage.
f Do not leave the switched-on power tool un-
attended.
f Store idle power tools out of the reach of
children. Do not allow persons unfamiliar
with the power tool or these instructions to
operate the power tool. Power tools are
dangerous in the hands of untrained users.
f Do not expose the power tool to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
f Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil,
sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric
shock.
f Always wear safety goggles. Safety goggles
will reduce the risk of injuries.
f Disconnect the plug from the socket outlet
before making any adjustments, changing
accessories, or placing the power tool
aside. This safety measure prevents uninten-
tional starting of the power tool.
f Check the power tool, cord and plug each
time before use. Do not use the power tool
if damage is determined. Do not open the
power tool yourself and have it serviced on-
ly by a qualified repair person using only
original spare parts. Damaged power tools,
cords and plugs increase the risk of electric
shock.
Provide for good ventilation of
your working place. Gas and va-
pour developing during working
are often harmful to one’s health.
f Wear safety gloves and do not touch the hot
nozzle. Danger of burning.
f Never direct the hot air jet against persons
or animals.
f Do not use the power tool as a hairdryer.
The hot air being blown out is significantly
hotter than that from a hairdryer.
f When operating the power tool in damp en-
vironments is unavoidable, use a residual
current device (RCD). The use of a residual
current device (RCD) reduces the risk of an
electric shock.
f Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
OBJ_BUCH-228-002.book Page 11 Tuesday, November 2, 2010 10:59 AM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GHG 600 CE Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GHG 600 CE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info