786515
13
Zoom out
Zoom in
Previous page
1/181
Next page
English | 13
(2) Heat shield, removable
(3) Storage surface
(4) On/off switch and power settings
(5) Memory preset display (GHG 23-66)
(6) Unit of measurement for temperature
(7) Thermal protection regulation symbol
(8) Fan symbol(GHG 23-66)
(9) Airflow display (GHG 23-66)
(10) Fan button (GHG 23-66)
(11) Memory button(GHG 23-66)
(12) +/– button
(13) Display
(14) Surface nozzlea)
(15) Glass protection nozzlea)
(16) Angle nozzlea)
(17) Reflector nozzlea)
(18) Welding wirea)
(19) Welding shoea)
(20) Reducing nozzlea)
(21) Heat shrink plastic tubea)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Heat gun GHG 20-63 GHG 23-66
Article number 3601BA62.. 3601BA63..
Rated power input W 2000 2100 (2300A))
Airflow l/min 150/150–300/300–500 150–300/150–500
Temperature at the nozzle outletB) °C 50–630 50–650
Temperature measurement accuracy
at the nozzle outlet ±10% ±10%
on the display ±5% ±5%
Operating temperature of displayC) °C 0to+50 0to+50
Max. permissible ambient temperature in operation °C +40 +40
Weight according to EPTA-Procedure01:2014 kg 0.65 0.67
Protection class / /
A) Maximum possible input power
B) At an ambient temperature of 20°C
C) The display may go blank if outside the operating temperature.
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/vibration information
Typically, the A-weighted sound pressure level of the heat
gun is less than 70dB(A).
Vibration total values ah (triax vector sum) and uncertainty K:
ah<2.5m/s2, K=1.5m/s2.
Operation
Starting operation
uPay attention to the mains voltage. The voltage of the
electricity source must agree with the specifications on
the type plate of the heat gun.
Creation of Smoke During Initial Use
A coating protects the metal surfaces from corrosion ex-
works. This protective layer evaporates during initial use.
The heat gun may display discolourations on the nozzle(1)
due to the production process. These do not count as dam-
age; the functioning of the heat gun is not affected.
Switching On
Slide the on/off switch (4) upwards.
Thermal protection regulation: Upon overheating (e.g. due
to an air blockage or not enough air being supplied), the heat
gun switches off the heating automatically and the thermal
protection regulation symbol(7) appears on the display. The
blower, however, will continue to run. If the heat gun has
cooled down to operating temperature, the heating is auto-
matically switched on again.
Switching Off
Slide the on/off switch(4) downwards into the0position.
uAfter a sustained period of work at a high temperat-
ure, let the heat gun cool down before switching off.
To do this, allow it to run on the lowest temperature
setting for a short while.
Regulating airflow (GHG20-63)
With the on/off switch(4), you can set the airflow to one of
several different levels:
Bosch Power Tools 1 609 92A 7NG | (14.06.2022)
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GHG 20-63 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GHG 20-63 in the language / languages: All languages as an attachment in your email.

The manual is 4.8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info