786517
11
Zoom out
Zoom in
Previous page
1/135
Next page
English | 11
away from heat and oil. Damaged or entangled cords in-
crease the risk of electric shock.
uAlways wear safety goggles. Safety goggles reduce the
risk of injury.
uPull the plug out of the socket before adjusting the
tool settings, changing accessories, or storing the
heat gun. This safety measure prevents the heat gun
from being started accidentally.
uAlways check the heat gun, cable and plug before use.
Stop using the heat gun if you discover any damage.
Do not open the heat gun yourself, and have it re-
paired only by a qualified specialist using only original
replacement parts. Damaged heat guns, cables and
plugs increase the risk of electric shock.
Keep your work area well-ventilated. The
gas and steam produced during work are often
harmful to one's health.
uWear protective gloves and do not touch the nozzle
while it is hot. There is a risk of burns.
uDo not direct the airflow at persons or animals.
uDo not use the heat gun as a hair dryer. The outgoing
airflow is considerably hotter than that of a hair dryer.
uDo not allow foreign objects to enter the heat gun.
uThe distance between the nozzle and the workpiece
depends on the material you are working on (metal,
plastic, etc.) and the intended working method. Al-
ways test the amount of air and temperature first.
uIf operating the heat gun in a damp environment is un-
avoidable, use a residual current device (RCD). Use of
an RCD reduces the risk of electric shock.
uNever use the heat gun if the cable is damaged. Do not
touch the damaged cable and pull out the mains plug if
the cable is damaged while working. Damaged cables
increase the risk of an electric shock.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Product Description and
Specifications
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The heat gun is intended for deforming and welding plastic,
removing coats of paint and heating heat shrink plastic
tubes. It is also suitable for soldering and tinning, melting ad-
hesive bonding and thawing water pipes.
The heat gun is intended for handheld, supervised use.
Product Features
The numbering of the product features refers to the repres-
entation of the heat gun on the graphics page.
(1) Storage surface
(2) On/off switch and power settings
(3) Nozzle
(4) Heat shield, removable
(5) Thumbwheel for temperature control
(6) Surface nozzlea)
(7) Glass protection nozzlea)
(8) Angle nozzlea)
(9) Reflector nozzlea)
(10) Welding wirea)
(11) Welding shoea)
(12) Reducing nozzlea)
(13) Heat shrink plastic tubea)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Heat gun GHG20‑60
Article number 3601BA64..
Rated power input W 2000
Airflow l/min
l/min 150–300
300–500
Temperature at the nozzle out-
letA) °C 50–630
Temperature measurement ac-
curacy ±10%
Weight according to EPTA-Pro-
cedure01:2014 kg 0.55
Protection class /
A) At an ambient temperature of 20°C
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/vibration information
Typically, the A-weighted sound pressure level of the heat
gun is less than 70dB(A).
Vibration total values ah (triax vector sum) and uncertainty K:
ah<2.5m/s2, K=1.5m/s2.
Bosch Power Tools 1 609 92A 7NF | (28.04.2022)
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GHG 20-60 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GHG 20-60 in the language / languages: All languages as an attachment in your email.

The manual is 3.09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info