786279

Bosch GEX 18V-125 Manual

16
Zoom out
Zoom in
Previous page
1/221
Next page
16 | English
Battery model GBA 18V...
LEDs Capacity
3× continuous green light 60−100%
2× continuous green light 30−60%
1× continuous green light 5−30%
1× flashing green light 0−5%
Battery model ProCORE18V...
LEDs Capacity
5× continuous green light 80−100%
4× continuous green light 60−80%
3× continuous green light 40−60%
2× continuous green light 20−40%
1× continuous green light 5−20%
1× flashing green light 0−5%
Changing the Sanding Sheet (seefigureA)
To remove the sanding sheet (10), lift it from the side and
pull it from the sanding pad (8).
Remove dirt and dust from the sanding pad (8), e.g. with a
paintbrush, before attaching a new sanding sheet.
The surface of the sanding pad (8) is fitted with a hook-and-
loop fastening, allowing sanding sheets with a hook-and-loop
backing to be secured quickly and easily.
Press the sanding sheet (10) firmly onto the underside of
the sanding pad (8).
To ensure optimum dust extraction, make sure that the
punched holes in the sanding sheet (10) are aligned with the
drilled holes in the sanding pad (8).
To increase the sanding pad's service life, in particular when
using net abrasives (e.g.Bosch M480), apply the PadSaver
(accessory) between the sanding pad and abrasive.
Selection of the Sanding Plate
The power tool can be fitted with sanding discs of various
hardnesses, depending on the application:
– Soft sanding disc: Suitable for sensitive sanding even on
curved surfaces
– Medium-hard sanding disc: Suitable for all sanding work,
universal application
– Hard sanding disc: Suitable for heavy sanding on flat sur-
faces
Changing the sanding pad (see figure B)
Note: Replace damaged sanding pads (8) immediately.
Pull off the sanding sheet. Unscrew the 4 screws(11) com-
pletely (using a T20 screwdriver) and remove the sanding
pad(8). Attach the new sanding pad(8) and retighten the
screws.
Note: When attaching the sanding pad, make sure that the
teeth of the catch mate with the recesses in the sanding pad.
Note: Damaged sanding disc holders(12) must only be re-
placed by an after-sales service centre authorised to work
with Bosch power tools.
Dust/Chip Extraction
The dust from materials such as lead paint, certain types of
wood and minerals can be harmful to human health. Touch-
ing or breathing in this dust can trigger allergic reactions
and/or cause respiratory illnesses in the user or in people in
the near vicinity.
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
– Use a dust extraction system that is suitable for the ma-
terial wherever possible.
– Provide good ventilation at the workplace.
– It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
uAvoid dust accumulation at the workplace. Dust can
easily ignite.
Self-generated dust extraction with dust bag (see figures
C–E)
Place and move the complete dust bag (2) onto the extrac-
tion outlet (13) until it lines up precisely with the power tool.
To empty the dust bag(14), pull the complete dust bag (2)
away from the extraction outlet (13). Unscrew the adapter
(15) from the dust bag (14) and empty the dust bag.
Note: Empty the dust bag(14) in good time to ensure op-
timum dust extraction.
When working vertical surfaces, hold the power tool in such
a manner that the dust bag (2) faces downward.
External dust extraction (see figure F)
Fit a dust extraction hose (16) onto the extraction outlet
(13).
Connect the dust extraction hose (16) to an extractor. You
will find an overview of connecting to various dust extractors
at the end of these operating instructions.
The dust extractor must be suitable for the material being
worked.
When extracting dry dust that is especially detrimental to
health or carcinogenic, use a special dust extractor.
When working on vertical surfaces, hold the power tool with
the dust extraction hose facing downwards.
1 609 92A 7N0 | (17.05.2022) Bosch Power Tools
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GEX 18V-125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GEX 18V-125 in the language / languages: All languages as an attachment in your email.

The manual is 6.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info