786280

Bosch GEX 12V-125 Manual

16
Zoom out
Zoom in
Previous page
1/211
Next page
16 | English
Certain dusts, such as oak or beech dust, are classified as
carcinogenic, especially in conjunction with wood treatment
additives (chromate, wood preservative). Materials contain-
ing asbestos may only be machined by specialists.
– Use a dust extraction system that is suitable for the ma-
terial wherever possible.
– Provide good ventilation at the workplace.
– It is advisable to wear a P2 filter class breathing mask.
The regulations on the material being machined that apply in
the country of use must be observed.
uAvoid dust accumulation at the workplace. Dust can
easily ignite.
Self-generated dust extraction with dust bag (see figures
D–F)
Place and move the complete dust bag (2) onto the extrac-
tion outlet (12) until it lines up precisely with the power tool.
To empty the dust bag(13), pull the complete dust bag (2)
away from the extraction outlet (12). Unscrew the adapter
(14) from the dust bag (13) and empty the dust bag.
Note: Empty the dust bag(13) in good time to ensure op-
timum dust extraction.
When working vertical surfaces, hold the power tool in such
a manner that the dust bag (2) faces downward.
External dust extraction (see figure G)
Fit a dust extraction hose (15) onto the extraction outlet
(12).
Connect the dust extraction hose (15) to an extractor. You
will find an overview of connecting to various dust extractors
at the end of these operating instructions.
The dust extractor must be suitable for the material being
worked.
When extracting dry dust that is especially detrimental to
health or carcinogenic, use a special dust extractor.
When working on vertical surfaces, hold the power tool with
the dust extraction hose facing downwards.
Operation
Starting Operation
Switching On/Off
uMake sure that you are able to press the On/Off switch
without releasing the handle.
To switch on the power tool, press the on/off switch(1).
To switch off the power tool, press the on/off switch(1)
again.
Preselecting the orbital stroke rate
You can even preselect the orbital stroke rate during opera-
tion using the necessary orbital stroke rate preselection
thumbwheel (6).
1–2 Low orbital stroke rate
3–4 Medium orbital stroke rate
5–6 High orbital stroke rate
The required orbital stroke rate is dependent on the material
and the work conditions and can be determined using prac-
tical tests.
The Constant Electronic keeps the orbital stroke rate at no
load and under load virtually consistent, guaranteeing uni-
form performance.
After working at a low orbital stoke rate for an extended
period, you should operate the power tool at the maximum
orbital stroke rate for approximately three minutes without
load to cool it down.
Application Overview
Application/Material Abrasive Speed setting
Removing – Removing old paint and varnish
– Sanding wood
P60–P100 4–6
– Sanding thermoplastic synthetic materials P60–P100 1–3
Preparing – Sanding wood and veneer prior to painting
– Edge chamfering on wooden materials
– Smoothing wooden surfaces before staining
P120–P180 4–6
– Intermediate lacquer sanding and sanding undercoats
– Intermediate lacquer sanding on edges
P220–P280 1–3
Finishing – Sanding wood
– Sanding solid wood edges and veneer edges
P150–P180 4–6
– Lacquer sanding on stained surfaces and edges P240–P320 1–3
Working Advice
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
uAlways wait until the power tool has come to a com-
plete stop before placing it down.
uThis power tool is not suitable for bench-mounted use.
It must not be clamped into a vice or fastened to a work-
bench, for example.
1 609 92A 7MX | (17.05.2022) Bosch Power Tools
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GEX 12V-125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GEX 12V-125 in the language / languages: All languages as an attachment in your email.

The manual is 6.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info