Manual Bosch gex 125 a (page 15 of 179) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

389572

Zoom out

Zoom in

1/179

English | 15

Bosch Power Tools 1 609 929 Y19 | (15.3.11)

Selecting the Sanding Sheet

Depending on the material to be worked and the required rate of material removal, different sanding sheets are available:

Selection of the Sanding Plate

Depending on the application, the machine can be equipped

with sanding plates of different hardness:

– Soft sanding plate: Suitable for polishing and sensitive

sanding (also for curved surfaces).

– Medium sanding plate: Suitable for all sanding applications

and general-purpose use.

– Hard sanding plate: Suitable for high sanding capacity on

flat surfaces.

Replacing the Sanding Plate (see figure B)

Note: Replace a damaged sanding plate 8 immediately.

Pull off the sanding sheet or polishing tool. Completely un-

screw the screw 11 and take off the sanding plate 8. Attach

the new sanding plate 8 and tighten the screw again.

Note: When attaching the sanding plate, pay attention that

the toothing of the drive element engage into the openings of

the sanding plate.

Dust/Chip Extraction

f Dusts from materials such as lead-containing coatings,

some wood types, minerals and metal can be harmful to

one’s health. Touching or breathing-in the dusts can cause

allergic reactions and/or lead to respiratory infections of

the user or bystanders.

Certain dusts, such as oak or beech dust, are considered

as carcinogenic, especially in connection with wood-treat-

ment additives (chromate, wood preservative). Materials

containing asbestos may only be worked by specialists.

– As far as possible, use a dust extraction system suitable

for the material.

– Provide for good ventilation of the working place.

– It is recommended to wear a P2 filter-class respirator.

Observe the relevant regulations in your country for the

materials to be worked.

f Prevent dust accumulation at the workplace. Dusts can

easily ignite.

Material Application Grain size

–Paint

– Varnish

– Filling compound

–Filler

For sanding off paint coarse 40

For sanding primer (e.g., for removing brush dashes,

drops of paint and paint run)

medium 80

100

120

For final sanding of primers before coating fine 180

240

320

400

Expert for Wood

– All wooden materials (e.g.,

hardwood, softwood, chip-

board, building board)

Best for Wood

–Hardwood

– Particle Board

– Building board

– Metal materials

For coarse-sanding, e.g. of rough, unplaned beams and

boards

coarse 40

For face sanding and planing small irregularities medium 80

100

120

For finish and fine sanding of wood fine 180

240

320

400

– Automotive paint

– Masonry, stone

–Marble

–Granite

–Ceramic

–Glass

– Plexiglas

– Glass-fibre plastics

For pre-sanding coarse 80

For shaping and braking edges medium 100

120

For final sanding and forming fine 180

240

320

400

For polish-sanding and rounding off edges very fine 600

1200

OBJ_BUCH-424-004.book Page 15 Tuesday, March 15, 2011 3:24 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gex 125 a in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,84 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gex 125 a Manual

Product: