786134
15
Zoom out
Zoom in
Previous page
1/229
Next page
English | 15
(14) Cover cap a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Cordless impact screwdriver GDR 180-LI GDX 180-LI
Article number 3 601 JG5 1.. 3 601 JG5 2..
Rated voltage V 18 18
No-load speedA) min-1 0–2800 0–2800
Impact rate min-1 0–3600 0–3600
Maximum torque, hard screwdriving application according to ISO 5393
¼" internal hexagonA) Nm 160 160
½" Nm 180
Machine screw diameter mm M6–M14 M6–M16
Tool holder
¼" internal hexagon
½"
¼" internal hexagon
Weight according to EPTA-Procedure 01:2014A) kg 1.7 1.8
Recommended ambient temperature during charging °C 0 to +35 0 to +35
Permitted ambient temperature during operationB) and
during storage °C -20 to +50 -20 to +50
Recommended batteries GBA 18V...
ProCORE18V... GBA 18V...
ProCORE18V...
Recommended chargers GAL 18...
GAX 18...
GAL 36...
GAL 18...
GAX 18...
GAL 36...
A) Depends on battery in use
B) Limited performance at temperatures <0°C
Noise/Vibration Information
Noise emission values determined according to
EN62841-2-2.
Typically the A-weighted noise level of the power tool is:
Sound pressure level 96dB(A); sound power level
107dB(A). Uncertainty K=3dB.
Wear hearing protection
Total vibration values ah (triax vector sum) and uncertainty K
determined according to EN62841-2-2:
Tightening screws and nuts of the maximum permitted size:
ah =9.5m/s2, K=1.5m/s2.
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
uRemove the battery from the power tool before carry-
ing out work on the power tool (e.g. maintenance,
changing tool, etc.). The battery should also be re-
moved for transport and storage. There is risk of injury
from unintentionally pressing the on/off switch.
Charging the Battery
uUse only the chargers listed in the technical data. Only
these chargers are matched to the lithium-ion battery of
your power tool.
Note: The battery is supplied partially charged. To ensure
full battery capacity, fully charge the battery in the charger
before using your power tool for the first time.
Bosch Power Tools 1 609 92A 5XY | (26.04.2021)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GDX 180-Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDX 180-Li in the language / languages: All languages as an attachment in your email.

The manual is 4.86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info