786138
20
Zoom out
Zoom in
Previous page
1/307
Next page
20 | English
Cordless Impact Wrench GDS 18V-1000 GDS 18V-1050H GDS 18V-1000C GDS 18V-1050HC
Permitted ambient temperat-
ure during operation and dur-
ing storage
°C –20to+50 –20to+50 –20to+50 –20to+50
Compatible rechargeable bat-
teries GBA 18V...
ProCORE18V... GBA 18V...
ProCORE18V... GBA 18V...
ProCORE18V... GBA 18V...
ProCORE18V...
Recommended batteries for
full perfomance ProCORE18V...
≥5.5Ah ProCORE18V...
≥5.5Ah ProCORE18V...
≥5.5Ah ProCORE18V...
≥5.5Ah
Recommended chargers GAL 18…
GAX 18…
GAL 36…
GAL 18…
GAX 18…
GAL 36…
GAL 18…
GAX 18…
GAL 36…
GAL 18…
GAX 18…
GAL 36…
Data transfer
Bluetooth®C) Bluetooth® 4.1
(Low Energy)
Bluetooth® 4.1
(Low Energy)
Signal interval s 8 8
Max. signal rangeD) m 30 30
A) Measured at 20–25°C with rechargeable battery ProCORE18V 8.0Ah.
B) Measured withGBA 18V 1.5Ah andGBA 18V 12Ah.
C) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile
(GAP).
D) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be signi-
ficantly weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Noise/Vibration Information
GDS 18V-1000 GDS 18V-1050H GDS 18V-1000C GDS 18V-1050HC
Noise emission values determined according toEN62841-2-2.
Typically, the A-weighted noise level of the power tool is
Sound pressure level
Sound power level
UncertaintyK
Wear hearing protection!
dB(A)
dB(A)
dB
91
102
3
95
106
3
95
106
3
95
106
3
Vibration total values ah (triax vector sum) and uncertainty K determined according toEN62841-2-2:
Impact tightening of fasteners of the maximum capacity of the tool
ah
K
m/s2
m/s2
12
1.5
13
1.5
13.5
1.5
13.5
1.5
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
working period.
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
over the total working period.
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
and organising workflows correctly.
Assembly
uPull the plug out of the socket before carrying out any
work on the power tool.
uBefore any work on the power tool (e.g. maintenance,
tool change, etc.) as well as during transport and stor-
age, set the rotational direction switch to the middle
1 609 92A 7X5 | (04.07.2022) Bosch Power Tools
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GDS 18V-1000 C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDS 18V-1000 C in the language / languages: All languages as an attachment in your email.

The manual is 11.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info