Manual Bosch gdr 10 8v li (page 19 of 224) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

381461

Zoom out

Zoom in

1/224

English | 19

Bosch Power Tools 1 609 929 T06 | (21.10.09)

Changing the Tool (see figure B)

f Before any work on the machine (e. g.,

maintenance, tool change, etc.) as well as

during transport and storage, set the rota-

tional direction switch to the centre posi-

tion. Unintentional actuation of the On/Off

switch can lead to injuries.

Inserting

Pull the locking sleeve 3 forward, push the in-

sert tool to the stop into the tool holder 2 and

release the locking sleeve 3 to lock the insert

tool.

Use only screwdriver bits with ball catch 1

(DIN 3126-E6.3). Other screwdriver bits 11 can

be used with a universal bit holder with ball

catch 10.

Removing

Pull the locking sleeve 3 forward and remove the

insert tool.

Operation

Method of Operation

The tool holder 2 with the tool is driven by an

electric motor via a gear and impact mechanism.

The working procedure is divided into two phas-

es:

Screwing in and tightening (impact mechanism

in action).

The impact mechanism is activated as soon as

the screwed connection runs tight and thus load

is put on the motor. In this instance, the impact

mechanism converts the power of the motor to

steady rotary impacts. When loosening screws

or nuts, the process is reversed.

Starting Operation

Inserting the Battery

f Use only original Bosch lithium ion batter-

ies with the voltage listed on the nameplate

of your power tool. Using other batteries can

lead to injuries and pose a fire hazard.

Note: Use of batteries not suitable for the ma-

chine can lead to malfunctions of or cause dam-

age to the power tool.

Set the rotational direction switch 7 to the cen-

tre position in order to avoid unintentional start-

ing. Insert the charged battery 6 into the handle

so that it can be felt to engage and faces flush

against the handle.

Reversing the Rotational Direction

(see figure C)

The rotational direction switch 7 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 8 actuated.

Right rotation: For driving in screws and tight-

ening nuts, press the rotational direction switch

7 through to the left stop.

Left Rotation: For loosening and unscrewing

screws and nuts, press the rotational direction

switch 7 through to the right stop.

Switching On and Off

To start the machine, press the On/Off switch 8

and keep it pressed.

The power light 4 lights up when the On/Off

switch 8 is slightly or completely pressed, and

allows the work area to be illuminated when

lighting conditions are insufficient.

To switch off the machine, release the On/Off

switch 8.

Adjusting the Speed

The speed of the switched on power tool can be

variably adjusted, depending on how far the

On/Off switch 8 is pressed.

Light pressure on the On/Off switch 8 results in

a low rotational speed. Further pressure on the

switch results in an increase in speed.

Temperature Dependent Overload Protection

When using as intended for, the power tool can-

not be subject to overload. When the load is too

high or the allowable battery temperature range

of 0–70 °C is exceeded, the speed is reduced.

The power tool will not run at full speed until

reaching the allowable battery temperature.

OBJ_BUCH-223-003.book Page 19 Wednesday, October 21, 2009 8:06 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gdr 10 8v li in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch gdr 10 8v li Manual

Product: