591910
11
Zoom out
Zoom in
Previous page
1/177
Next page
English | 11
Bosch Power Tools 1 609 92A 1A4 | (12.5.15)
Never operate the machine without the portable resid-
ual current device (PRCD) provided.
Products sold in GB only: Never operate the 110 V exe-
cution of the machine without isolation transformer ac-
cording to EN/IEC 61558-1 and EN/IEC 61558-2-23.
The isolation transformer must have a grounded earth
wire on the secondary winding side.
Before starting work, check the proper function of the
portable residual current device (PRCD). Have a dam-
aged portable residual current device (PRCD) repaired
or replaced by your Bosch after-sales service agent.
Pay attention that neither persons in the working area
nor the power tool itself come into contact with the wa-
ter that comes out.
When wet drilling over-
head, the escaping water
must be collected. To do
this, insert the power tool in-
to a drill stand and mount a
water collecting ring (see
“Accessories/Spare Parts”,
page 14).
Ensure that water-carrying hoses, connectors and the
water collection ring (accessory) are in immaculate
condition. Replace damaged or worn parts before the
next use. Water escaping from parts of the power tool will
increase the risk of electric shock.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
In conjunction with diamond wet-drilling core bits and a water
supply, the power tool is intended for wet drilling in mineral
materials such as concrete, reinforced concrete or brickwork.
The power tool can be combined with an extraction device
(water collection ring and wet/dry vacuum cleaner).
The power tool must only be used together with the diamond
drill stand GCR 350.
Using an anchor, the drill stand for diamond drills can be fas-
tened to the floor, wall and overhead.
The drill stand for diamond drills can be attached to the floor
by means of vacuum (accessory) or (with an additional safe-
guard) against the wall. Attaching overhead is not permitted.
The drill stand for diamond drills can be attached to the floor
using the quick-clamping column. Attaching to a wall or over-
head is not permitted.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Drill stand for diamond drills GCR 350*
2 Portable residual current device (PRCD)
3 On/Off switch
4 Star handle*
5 Parking brake*
6 Gear selector
7 Water outlet connector
8 Water tap
9 Core bit*
10 Drill spindle
11 Easy-release element
12 Carrying handle
13 Internal hex screws of the carrying handle
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Noise Information
Sound emission values determined according to
EN 61029-2-6.
Typically the A-weighted noise levels of the product are:
Sound pressure level 96 dB(A); Sound power level
110 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Diamond Drill GDB 350 WE
Article number
3 601 A89 9..
Rated power input
W3200
Output power
W2300
Rated speed n
0
–1st gear
–2nd gear
–3rd gear
min
-1
min
-1
min
-1
420
820
1250
Drilling diameter
–1st gear
–2nd gear
–3rd gear
mm
mm
mm
165350
80160
55105
Tool holder 11/4"UNC
Water supply pressure (max.)
bar 3
Weight according to
EPTA-Procedure 01:2014
kg 11.9
Protection class
/I
Dimensions (incl. removable
product features)
mm 534 x 142 x 168
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Drill stand for diamond drills GCR 350
Article number
3 601 A90 200
OBJ_BUCH-2203-002.book Page 11 Tuesday, May 12, 2015 9:22 AM
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GDB 350 WE Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDB 350 WE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info