Manual Bosch GDB 2500 WE (page 14 of 270) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544269

Zoom out

Zoom in

1/270

14 | English

1 609 929 W83 | (9.11.10) Bosch Power Tools

f Never use the machine with a damaged

cable. Do not touch the damaged cable and

pull the mains plug when the cable is dam-

aged while working. Damaged cables

increase the risk of an electric shock.

f Check the cable regularly and have a dam-

aged cable repaired only through an author-

ised customer service agent for Bosch power

tools. Replace damaged extension cables.

This will ensure that the safety of the power

tool is maintained.

f Wear non-skid shoes. This prevents injuries

that can occur from slipping on smooth sur-

faces.

f Use only original Bosch accessories.

f The safety and operating instructions for

the drill stand and the accessories being

used are to be strictly observed!

f Never leave the machine before it has come

to a complete stop. Cutting tools that are

still running can cause injuries.

f Connect the machine to a mains supply with

proper earthing connection. Socket outlet

and extension cable must be equipped with

an operative protective conductor.

f Products sold in GB only: Your product is fit-

ted with an BS 1363/A approved electric plug

with internal fuse (ASTA approved to

BS 1362).

If the plug is not suitable for your socket out-

lets, it should be cut off and an appropriate

plug fitted in its place by an authorised cus-

tomer service agent. The replacement plug

should have the same fuse rating as the origi-

nal plug.

The severed plug must be disposed of to

avoid a possible shock hazard and should nev-

er be inserted into a mains socket elsewhere.

Products sold in AUS and NZ only: Use a re-

sidual current device (RCD) with a rated re-

sidual current of 30 mA or less.

Functional Description

Read all safety warnings and all

instructions. Failure to follow the

warnings and instructions may

result in electric shock, fire and/or

serious injury.

While reading the operating instructions, unfold

the graphics page for the machine and leave it

open.

Intended Use

In conjunction with wet-drilling diamond core

bits and a water supply, the machine is intended

for wet drilling in mineral materials such as con-

crete and reinforced concrete. It is not suitable

for overhead drilling. The machine may only be

used in conjunction with the S 500 A diamond-

drill stand. The machine can be used in combi-

nation with an extraction device (water collec-

tion ring and all-purpose vac).

Product Features

The numbering of the product features refers to

the illustration of the machine on the graphics

page.

1 S 500 A diamond-drill stand*

2 Residual current device (RCD)

3 Water outlet connector

4 Gear selector

5 Feed handle (S 500 A)

6 Water collection ring*

7 Core bit*

8 Sliding ring*

9 Drill spindle

10 Water-flow indicator

11 Water cock

12 Control indicator

13 On/Off switch

14 Insulated gripping surfaces

*Accessories shown or described are not part of the

standard delivery scope of the product. A complete

overview of accessories can be found in our acces-

sories program.

OBJ_BUCH-114-002.book Page 14 Tuesday, November 9, 2010 11:58 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDB 2500 WE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 14,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GDB 2500 WE Manual

Product: