544268

Bosch GDB 1600 WE Manual

17
Zoom out
Zoom in
Previous page
1/314
Next page
English | 17
Bosch Power Tools 1 609 929 V13 | (18.11.10)
f Wear non-skid shoes. This prevents injuries
that can occur from slipping on smooth sur-
faces.
f Use only original Bosch accessories.
f Connect the machine to a mains supply with
proper earthing connection. Socket outlet
and extension cable must be equipped with
an operative protective conductor.
f Products sold in GB only: Your product is fit-
ted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to
BS 1362).
If the plug is not suitable for your socket out-
lets, it should be cut off and an appropriate
plug fitted in its place by an authorised cus-
tomer service agent. The replacement plug
should have the same fuse rating as the orig-
inal plug.
The severed plug must be disposed of to
avoid a possible shock hazard and should
never be inserted into a mains socket else-
where.
Products sold in AUS and NZ only: Use a re-
sidual current device (RCD) with a rated re-
sidual current of 30 mA or less.
Instructions for operation without drill stand
f Use auxiliary handle(s), if supplied with the
tool. Loss of control can cause personal
injury.
f Always wait until the machine has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
f When working with the machine, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
f If the application tool should become
blocked, switch the machine off. Loosen
the application tool.
f Before switching on the power tool, make
sure that the application tool moves freely.
When switching on with a blocked drilling
tool, high torque reaction can occur.
Instructions for operation with drill stand
f Never leave the machine before it has come
to a complete stop. Cutting tools that are
still running can cause injuries.
f Hold the drill stand by the insulated grip-
ping surfaces when performing operations
where the application tool could contact
hidden wiring or its own power cord. Con-
tact with a “live” wire will also make exposed
metal parts of the drill stand “live” and shock
the operator.
Instructions for the GDB 1600 WE
Never operate the machine with-
out the residual current device
(RCD) provided.
f Before starting work, check the proper
function of the residual current device
(RCD). Have a damaged residual current de-
vice (RCD) repaired or replaced by your
Bosch after-sales service agent.
f Pay attention that neither persons in the
working area nor the power tool itself come
into contact with the water that comes out.
When wet-drilling
overhead, the water
coming out must be
collected. For this, in-
sert the machine into a
drill stand and mount a
water collection ring.
f
Pay attention that water-conducting hoses,
connnection elements and the water collec-
tion ring (accessory) are in proper condi-
tion. Replace damaged or worn parts before
using the next time. Water coming out of
power tool components increases the risk of
electric shock.
OBJ_BUCH-116-003.book Page 17 Thursday, November 18, 2010 11:49 AM
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GDB 1600 WE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDB 1600 WE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info