Manual Bosch GDB 1600 DE (page 22 of 314) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

544267

Zoom out

Zoom in

1/314

22 | English

1 609 929 V13 | (18.11.10) Bosch Power Tools

Dust Extraction via Suction Head

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– As far as possible, use a dust extraction

system suitable for the material.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Insert the vacuum hose 18 of an all-purpose vac-

uum cleaner (accessory) into the vacuum con-

nection 17 on the suction head.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

f Before beginning work, consult the struc-

tural engineer, architect or construction su-

pervisor in charge. Only cut through rein-

forcements with the permission of a

structural engineer.

f When core drilling through walls or floors,

ensure to check the respective rooms/en-

closures for obstructions. Barrier off the

construction site and secure the drilled out

core against falling down with the use of

casing or similar.

Operational Check of the Residual Current

Device (GDB 1600 WE)

Check the proper function of the residual cur-

rent device 4 each time before working:

– Push the “RESET” button on the residual cur-

rent device. The service readiness of the re-

sidual current device is signalled through a

red control indicator.

– Push the “TEST” button. The indicator above

the “RESET” button becomes black.

Switching On

GDB 1600 WE: Push the “RESET” button on the

residual current device 4.

GDB 1600 WE with flusing head 6: Open the

water cock 10. Check the flow of water at the

water-flow indicator 8.

To start the power tool, press the On/Off

switch 3.

To lock the On/Off switch, keep it pressed and

additionally push the lock-on button 2.

Switching Off

Release the On/Off switch 3. When the On/Off

switch 3 is locked, press the On/Off switch first

and then release.

GDB 1600 WE with flusing head 6: Shut the wa-

ter cock 10. After finishing work, disconnect the

water outlet connector 5 from the water supply.

Open the water cock 10 and drain the remaining

water.

Adjusting the Speed

The speed of the switched on power tool can be

variably adjusted, depending on how far the

On/Off switch 3 is pressed.

Two speed ranges can be preselected with the

gear selector 22.

The two gears are recommended for the follow-

ing bore diameters:

1st gear 2nd gear

Wet drilling 33–102 mm 10–32 mm

Dry drilling 69–152 mm 32–68 mm

OBJ_BUCH-116-003.book Page 22 Thursday, November 18, 2010 11:49 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GDB 1600 DE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GDB 1600 DE Manual

Product: