594598

Bosch GCM 8000 SJ Professional Manual

26
Zoom out
Zoom in
Previous page
1/298
Next page
26 | English
1 609 92A 0HN | (16.6.14) Bosch Power Tools
Setting the Standard Bevel Angle 45° (Vertical)
– Bring the power tool into the working position.
– Turn the saw table 20 to the 0° detent 26. The lever 24
must be felt to engage in the detent.
– Loosen the lock lever 8 and tilt the tool arm leftward to the
stop (45°) by the handle 14.
Checking: (see figure O1)
– Adjust an angle gauge to 45° and position it on the saw ta-
ble 20.
The leg of the angle gauge must be flush with the saw blade 38
over the complete length.
Adjusting: (see figureO2)
– Loosen the lock lever 8.
– Loosen the lock nut of the stop screw 7 using a commercial
box-end or open-end spanner (size 10 mm).
– Screw the stop screw in or out until the leg of the angle
gauge is flush with the saw blade over the complete length.
– Retighten the lock lever 8 again.
– Afterwards, retighten the lock nut of the stop screw 7
again.
In case the angle indicator 30 is not in a line with the 45° mark
of the scale 29, firstly check the 0° setting for the bevel angle
and the angle indicator again. Then repeat the adjustment of
the 45° bevel angle.
Aligning the Angle Indicator (Horizontally) (see figure P)
– Bring the power tool into the working position.
– Turn the saw table 20 to the 0° detent 26. The lever 24
must be felt to engage in the detent.
Checking:
The angle indicator 22 must be in alignment with the 0° mark
of the scale 3.
Adjusting:
– Loosen screw 46 using a cross-head screwdriver and align
the angle indicator alongside the 0° mark.
– Retighten the screw again.
Transport (see figure Q)
Before transporting the power tool, the following steps must
be carried out:
– Loosen the locking screw 9 if tightened. Pull the tool arm
completely to the front and tighten the locking screw
again.
– Bring the machine into the transport position.
– Remove all accessories that cannot be mounted firmly to
the power tool.
If possible, place unused saw blades in an enclosed con-
tainer for transport.
– For lifting or transporting, hold the power tool by the re-
cessed grips 2 on the side of the saw table 20.
When transporting the power tool, use only the trans-
port devices and never use the protective devices.
Maintenance and Service
Maintenance and Cleaning
Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
For safe and proper working, always keep the power tool and
its ventilation slots clean.
The retracting blade guard must always be able to move freely
and retract automatically. Therefore, always keep the area
around the retracting blade guard clean.
Remove dust and chips after each working procedure by
blowing out with compressed air or with a brush.
Clean the roller 18 regularly.
Accessories
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch’s application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Article number
Material clamp 1 609 B04 224
Insert plates 1 609 B05 242
Dust bag 1 609 B00 840
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 216 x 30 mm, 48 teeth 2 608 640 641
Saw blades for plastic and non-ferrous metals
Saw blade 216 x 30 mm, 80 teeth 2 608 640 447
Saw blades for all types of laminate flooring
Saw blade 216 x 30 mm, 60 teeth 2 608 642 133
OBJ_BUCH-2154-002.book Page 26 Monday, June 16, 2014 2:55 PM
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GCM 8000 SJ Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GCM 8000 SJ Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 21,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info