594618
31
Zoom out
Zoom in
Previous page
1/402
Next page
English | 31
Bosch Power Tools 1 609 92A 0Z5 | (22.12.14)
14 Laser protection cap
15 Retracting blade guard
16 Roller
17 Clamping screw for saw-table extension
18 Mounting holes
19 Saw table
20 Insert plate
21 Locking bracket
22 Locking knob for various mitre angles
23 Mitre detent lever
24 Tilt protector
25 Mitre angle indicator
26 Detents for standard mitre angles
27 Scale for mitre angle
28 Saw-table extension
29 Recessed handles
30 Mounting holes for material clamp
31 SDS bolt
32 On/Off switch
33 Laser on/off switch (for marking of cutting line)
34 Laser warning label
35 Chip ejector
36 Slide device
37 Locking screw of the adjustable fence
38 Hex key (6 mm/4 mm)
39 Material clamp
40 Adjusting screw of depth stop
41 Depth stop
42 Spindle lock
43 Left bevel angle indicator
44 Stop for 0° standard bevel angle
45 Chip deflector
46 Hex socket screw (size 6 mm) for mounting of saw blade
47 Clamping flange
48 Saw blade
49 Interior clamping flange
50 Threaded rod
51 Wing bolt
52 Exit opening for laser beam
53 Screws for insert plate
54 Material stop
55 Lock screw of the material stop
56 Clamping screw of the material stop
57 Adjustment screw for laser position (flush levelling)
58 Hex key (2 mm)
59 Screws for laser protection cap
60 Fastening screw for laser mounting plate
61 Fastening screw for laser housing
62 Stop screw for 0° bevel angle
63 Stop screw for left-hand bevel angle range
64 Stop screw for right-hand bevel angle range
65 Set screws of scale 27 for mitre angles
66 Screw for mitre angle indicator
67 Velcro strap
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Sliding Mitre Saw GCM 12 SDE
Article number
3 601 M23 1.. 3 601 M23 16.
Rated power input
W 1800 1450
No-load speed
min
-1
31004000 3700
Reduced starting current
Laser type
nm
mW
635
<1
635
<1
Laser class
2 2
Weight according to EPTA-Procedure 01/2003
kg 28.4 28.4
Protection class
/II /II
Dimension of suitable saw blades
Saw blade diameter mm 305 305
Blade body thickness
mm 1.72.6 1.72.6
Mounting hole diameter
mm 30 30
Permissible workpiece dimensions (maximum/minimum) see page 35.
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
OBJ_BUCH-2301-002.book Page 31 Monday, December 22, 2014 10:15 AM
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GCM 12 SDE Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GCM 12 SDE Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 28,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info