786488
16
Zoom out
Zoom in
Previous page
1/266
Next page
16 | English
The measuring tool is suitable for indoor and outdoor use.
Product Features
The numbering of the product features shown refers to the il-
lustration of the measuring tool on the graphic page.
(1) Laser beam outlet aperture
(2) Battery indicator
(3) Button for laser operating mode
(4) On/off switch
(5) 1/4" tripod mount
(6) Guide groove
(7) Battery compartment cover locking mechanism
(8) Battery compartment cover
(9) Laser warning label
(10) Serial number
(11) Rotating mount (RM10)a)
(12) Guide rail
(13) Fastening slot
(14) Fine adjustment screw of the rotating mount
(15) Magnet
(16) Ceiling clip (DK10)a)
(17) Universal holder (BM1)a)
(18) Holder (LB10)a)
(19) Laser receivera)
(20) Laser target platea)
(21) Tripod (BT150)a)
(22) Telescopic shaft (BT350)a)
(23) Laser gogglesa)
(24) Protective baga)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical Data
Point and line laser GCL 2-50 G
Article number 3601K66M..
Working rangeA)
Standard laser lines 15m
Laser lines with laser re-
ceiver 5–50m
Laser points 10m
Levelling accuracyB)C)
Laser lines ±0.3mm/m
Laser points ±0.7mm/m
Self-levelling range ±4°
Levelling time <4s
Operating temperature –10°C to +45°C
Storage temperature –20°C to +70°C
Point and line laser GCL 2-50 G
Max. altitude 2000m
Relative air humidity max. 90%
Pollution degree according to
IEC61010-1 2D)
Laser class 2
Laser lines
Laser type 500−540nm, <10mW
C610
Divergence 50×10mrad (full angle)
Laser points
Laser type 500–540nm, < 1mW
C61
Divergence 0.8mrad (full angle)
Compatible laser receiver LR 7
Tripod mount 1/4"
Batteries 4×1.5V LR6(AA)
Weight according to
EPTA-Procedure 01:2014 0.58kg
Dimensions (length× width× height)
Without holder 126× 63× 115mm
With rotating mount RM10 145× 63× 180mm
Protection rating IP 64
A) The working range may be reduced by unfavourable environ-
mental conditions (e.g. direct sunlight).
B) At 20–25°C
C) The values stated presuppose normal to favourable environ-
mental conditions (e.g. no vibration, no fog, no smoke, no direct
sunlight). Extreme fluctuations in temperature can cause devi-
ations in accuracy.
D) Only non-conductive deposits occur, whereby occasional tem-
porary conductivity caused by condensation is expected.
The serial number (10) on the type plate is used to clearly identify
your measuring tool.
Assembly
Inserting/Changing the batteries
It is recommended that you use alkaline manganese batter-
ies to operate the measuring tool.
Press the locking mechanism (7) upwards to open the bat-
tery compartment cover (8) and remove the battery com-
partment cover. Insert the batteries.
When inserting the batteries, ensure that the polarity is cor-
rect according to the illustration on the inside of the battery
compartment.
The battery indicator(2) always indicates the current status
of the battery.
If the batteries are running low, the laser lines will gradually
become dimmer.
1 609 92A 7LT | (28.04.2022) Bosch Power Tools
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GCL 2-50 G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GCL 2-50 G in the language / languages: All languages as an attachment in your email.

The manual is 10.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info