78818
44
Zoom out
Zoom in
Previous page
1/90
Next page
1 609 929 M58 | (13.9.07) Bosch Power Tools
44 | Italiano
Informazioni sulla rumorosità e sulla vi-
brazione
Valori misurati conformemente alla norma
EN 60745.
Il livello di pressione acustica stimato A della
macchina ammonta a dB(A): livello di rumorosità
86 dB(A); livello di potenza acustica 97 dB(A). In-
certezza della misura K=3 dB.
Usare la protezione acustica!
Valori complessivi di oscillazione (somma vetto-
riale delle tre direzioni) misurati conformemente
alla norma EN 60745:
Forature nel metallo: Valore complessivo di oscil-
lazione a
h
=3,1 m/s
2
, incertezza della misura
K<1,5m/s
2
.
Il livello di vibrazioni indicato nelle presenti istru-
zioni è stato rilevato seguendo una procedura di
misurazione conforme alla norma EN 60745 e
può essere utilizzato per confrontare gli elettrou-
tensili. Lo stesso è idoneo anche per una valuta-
zione temporanea della sollecitazione da vibra-
zioni.
Il livello di vibrazioni indicato rappresenta gli im-
pieghi principali dell’elettroutensile. Qualora
l’elettroutensile venisse utilizzato tuttavia per al-
tri impieghi, con accessori differenti oppure con
manutenzione insufficiente, Il livello di vibrazioni
può differire. Questo può aumentare sensibil-
mente la sollecitazione da vibrazioni per l’intero
periodo di tempo operativo.
Per una valutazione precisa della sollecitazione
da vibrazioni bisognerebbe considerare anche i
tempi in cui l’apparecchio è spento oppure è ac-
ceso ma non è utilizzato effettivamente. Questo
può ridurre chiaramente la sollecitazione da vi-
brazioni per l’intero periodo operativo.
Adottare misure di sicurezza supplementari per
la protezione dell’operatore dall’effetto delle vi-
brazioni come p. es.: manutenzione dell’elettrou-
tensile e degli accessori, mani calde, organizza-
zione dello svolgimento del lavoro.
Dichiarazione di conformità
Assumendone la piena responsabilità, dichiaria-
mo che il prodotto descritto nei «Dati tecnici» è
conforme alle seguenti normative ed ai relativi
documenti: EN 60745 in base alle prescrizioni
delle direttive 2004/108/CE, 98/37/CE (fino al
28.12.2009), 2006/42/CE (a partire dal
29.12.2009).
Fascicolo tecnico presso:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
01.08.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Montaggio
Impugnatura supplementare
f Utilizzare il Vostro elettroutensile soltanto
con l’impugnatura supplementare 5.
Avvitare l’impugnatura supplementare 5 nella fi-
lettatura 4 alla testa ingranaggi.
Cambio degli utensili (vedi figura A)
f Prima di qualunque intervento sull’elettrou-
tensile estrarre la spina di rete dalla presa.
È possibile inserire punte utensili 1 con un cono
Morse MK3 direttamente nel mandrino portau-
tensile. Per punte con un cono Morse MK2 utiliz-
zare la bussola di riduzione 9.
Fare attenzione a che non ci sia grasso nel cono
Morse.
L’nserimento di punte utensili con manico cilin-
drico è possibile con il mandrino a cremagliera
11. Per questo avvitare il mandrino conico 10 sul
mandrino a cremagliera 11 ed inserire il mandri-
no conico con la bussola di riduzione 9 nel man-
drino portautensile 1.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_BUCH-506-001.book Page 44 Thursday, September 13, 2007 10:31 AM
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBM 32-4 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBM 32-4 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info