Manual Bosch GBM 10-2 RE (page 20 of 112) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78833

Zoom out

Zoom in

1/112

20 | English

1 609 929 V00 | (17.11.09) Bosch Power Tools

Replacing the Drill Chuck

f Before any work on the machine itself, pull

the mains plug.

Removing the Securing Screw

The keyless chuck 1 as well as the key type drill

chuck 14 is secured with a securing screw 17

against unintentional loosening from the drill

spindle. Completely open the keyless chuck 1 or

the key type drill chuck 14 and unscrew the se-

curing screw 17 in clockwise direction. Please

note that the securing screw has a left-hand

thread.

If the securing screw 17 is seated tightly, apply

a screwdriver to the screw head and loosen the

securing screw by giving a blow onto the handle

of the screwdriver.

Dismounting the Key Type Drill Chuck

(see figure E)

To dismount the key type drill chuck 14, position

an open-end spanner 18 (size 17 mm) against

the spanner flats of the drive spindle.

Place the machine on a firm surface, e. g. a work

bench. Insert the chuck key 13 into one of the

three holes of the key type drill chuck 14 and

loosen the key type drill chuck 14 with this lever

by turning in anticlockwise direction. A tightly

seated key type drill chuck is is loosened with a

light blow on the chuck key 13. Remove the

chuck key 13 from the key type drill chuck and

completely unscrew it from the machine.

Dismounting the Keyless Chuck

To remove the keyless chuck 1, clamp an Allen

key into the keyless chuck 1 and position the

open-end wrench 18 (size 17) against the span-

ner flats of the drive spindle. Place the machine

on a firm surface, e.g. a workbench. Hold the

open-end wrench 18 firmly and loosen the key-

less chuck 1 by turning the Allen key in anti-

clockwise direction. A tightly sitting keyless

chuck is loosened with a light blow onto the

long end of the Allen key. Remove the Allen key

from the keyless chuck and completely unscrew

it from the machine.

Mounting the Drill Chuck

The keyless chuck/key type drill chuck is mount-

ed in reverse order.

The drill chuck must be tightened with a

tightening torque of approx. 15 Nm.

Screw securing screw 17 in anticlockwise direc-

tion into the open keyless/key type drill chuck.

Always use a new securing screw, as the thread-

locking compound on its thread loses its effect

after multiple usage.

Dust/Chip Extraction

f Dusts from materials such as lead-containing

coatings, some wood types, minerals and

metal can be harmful to one’s health. Touch-

ing or breathing-in the dusts can cause aller-

gic reactions and/or lead to respiratory infec-

tions of the user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in

connection with wood-treatment additives

(chromate, wood preservative). Materials

containing asbestos may only be worked by

specialists.

– Provide for good ventilation of the work-

ing place.

– It is recommended to wear a P2 filter-

class respirator.

Observe the relevant regulations in your

country for the materials to be worked.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Reversing the Rotational Direction

(GBM 10-2 RE/GBM 13-2 RE)

The rotational direction switch 7 is used to re-

verse the rotational direction of the machine.

However, this is not possible with the On/Off

switch 6 actuated.

OBJ_DOKU-5396-002.fm Page 20 Tuesday, November 17, 2009 11:46 AM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBM 10-2 RE in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GBM 10-2 RE Manual

Product: