387119
21
Zoom out
Zoom in
Previous page
1/112
Next page
English | 21
Bosch Power Tools 1 609 929 V00 | (17.11.09)
Right rotation: Press the rotational direction
switch 7 through to the right stop (for drilling
and driving screws).
Left rotation: Press the rotational direction
switch 7 through to the left stop (for loosening
and unscrewing screws and nuts).
Gear Selection, Mechanical
f The gear selector 8 can be actuated at
standstill or when the machine is running.
However, this should not be done while op-
erating at full load or maximum speed.
Two speed ranges can be preselected with the
gear selector 8.
Gear I:
Low speed range; for working with large drilling
diameter or for driving in screws.
Gear II:
High speed range; for working with small drilling
diameter.
If the gear selector 8 cannot be fully engaged,
lightly rotate the drive spindle with the drill bit
by twisting the drill chuck.
Preselecting the Speed
(GBM 10-2 RE/GBM 13-2 RE)
The required speed can be preselected with the
thumbwheel 5 (also while running).
The required speed depends on the material to
be worked and the diameter of the tool. Deter-
mine the optimum setting through practical
testing.
Switching On and Off
To start the machine, press the On/Off switch 6
and keep it pressed.
To lock the pressed On/Off switch 6, press the
lock-on button 4.
To switch off the machine, release the On/Off
switch 6 or when it is locked with the lock-on
button 4, briefly press the On/Off switch 6 and
then release it.
Adjusting the Speed
(GBM 10-2 RE/GBM 13-2 RE)
The speed of the switched on power tool can be
variably adjusted, depending on how far the
On/Off switch 6 is pressed.
Light pressure on the On/Off switch 6 results in
a low rotational speed. Further pressure on the
switch results in an increase in speed.
Working Advice
f Apply the power tool to the screw/nut only
when it is switched off. Rotating tool inserts
can slip off.
For drilling in metal, use only perfectly sharp-
ened HSS drill bits (HSS=high-speed steel). The
appropriate quality is guaranteed by the Bosch
accessories program.
Twist drills from 2.510 mm can easily be
sharpened with the drill bit sharpener (see ac-
cessories).
We recommend the use of a drill stand (see ac-
cessories) for work where greater precision is
particularly required.
The machine vice, which is available as an acces-
sory, enables secure clamping of workpieces.
This prevents the workpiece from turning and
any accidents this would cause.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine itself, pull
the mains plug.
f For safe and proper working, always keep
the machine and ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
OBJ_BUCH-321-002.book Page 21 Tuesday, November 17, 2009 9:01 AM
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch gbm 1 re at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gbm 1 re in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info