387119
17
Zoom out
Zoom in
Previous page
1/112
Next page
English | 17
Bosch Power Tools 1 609 929 V00 | (17.11.09)
f Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for drilling in wood,
metal, ceramic and plastic. Machines with elec-
tronic control and right and left rotation are also
suitable for screwdriving and tapping.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Keyless chuck*
2 Front sleeve
3 Rear sleeve
4 Lock-on button for On/Off switch
5 Thumbwheel for speed preselection
(GBM 10-2 RE/GBM 13-2 RE)
6 On/Off switch
7 Rotational direction switch
(GBM 10-2 RE/GBM 13-2 RE)
8 Gear selector
9 Button for depth stop adjustment
10 Auxiliary handle (insulated gripping surface)
(GBM 13-2/GBM 13-2 RE)
11 Depth stop
12 Handle (insulated gripping surface)
13 Chuck key*
14 Key type drill chuck*
15 Screwdriver bit*
16 Drill spindle with hexagon socket
(GBM 10-2 RE/GBM 13-2 RE)
17 Securing screw for für keyless chuck/key
type drill chuck
18 Open-end spanner**
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
**Commercially available (not included in the deliv-
ery scope)
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted sound pressure level of
the product is 79 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Drilling into metal: Vibration emission value
a
h
=8.5 m/s
2
, Uncertainty K=4.0 m/s
2
,
Screwdriving: Vibration emission value
a
h
<2.5 m/s
2
, Uncertainty K=1.5 m/s
2
,
Tapping: Vibration emission value a
h
<2.5 m/s
2
,
Uncertainty K=1.5 m/s
2
.
OBJ_BUCH-321-002.book Page 17 Tuesday, November 17, 2009 9:01 AM
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch gbm 1 re at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch gbm 1 re in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info