Manual Bosch GBH 5 DCE (page 18 of 229) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

78749

Zoom out

Zoom in

1/229

18 | English

1 609 929 W79 | (9/7/10) Bosch Power Tools

Inserting (see figure A)

– Clean and lightly grease the shank end of the

tool.

The red symbols (open lock and bars) on the

locking sleeve 2 indicate that the tool holder is

open.

– Insert the tool into the tool holder with a

turning motion until it is automatically

locked. The locking sleeve automatically

snaps toward the front and the red ring is no

longer visible. This indicates that the tool

holder is locked.

Removing (see figure B)

– Pull the locking sleeve 2 back until it engag-

es. The red symbols on the locking sleeve can

now be seen again. The locking sleeve re-

mains in this position and the tool can be re-

moved without having to hold the locking

sleeve.

Dust/Chip Extraction

Dusts from materials such as lead-containing

coatings, some wood types, minerals and metal

can be harmful to one’s health. Touching or

breathing-in the dusts can cause allergic reac-

tions and/or lead to respiratory infections of the

user or bystanders.

Certain dusts, such as oak or beech dust, are

considered as carcinogenic, especially in con-

nection with wood-treatment additives (chro-

mate, wood preservative). Materials containing

asbestos may only be worked by specialists.

– Provide for good ventilation of the working

place.

– It is recommended to wear a P2 filter-class

respirator.

Observe the relevant regulations in your country

for the materials to be worked.

Operation

Starting Operation

f Observe correct mains voltage! The voltage

of the power source must agree with the

voltage specified on the nameplate of the

machine. Power tools marked with 230 V

can also be operated with 220 V.

Setting the Operating Mode

The operating mode of the power tool is select-

ed with the mode selector switch 3.

Note: Change the operating mode only when the

machine is switched off! Otherwise, the ma-

chine can be damaged.

– Turn the mode selector switch 3 to the re-

quested position.

In the “chiselling” position, the impact rate

preselected with the thumbwheel 7 is automat-

ically increased when switching on; this causes

the power tool to operate with increased capac-

ity when chiselling.

Switching On/Off in Drilling Mode

–To start the machine, press the On/Off

switch 5 and keep it pressed.

– To switch off the machine, release the

On/Off switch 5.

Position for hammer drilling

When the drilling tool does not im-

mediately rotate upon switching on,

allow the machine to run slowly un-

til the drilling tool rotates.

Vario-Lock position for adjustment

of the chiselling position

Position for chiselling

OBJ_BUCH-491-005.book Page 18 Friday, July 9, 2010 3:27 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBH 5 DCE in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 8,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GBH 5 DCE Manual

Product: