Manual Bosch GBH 4-32 DFR Professional (page 13 of 188) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

591885

Zoom out

Zoom in

1/188

English | 13

Bosch Power Tools 1 619 92A 06G | (2.12.13)

Hammer Safety Warnings

 Wear ear protectors. Exposure to noise can cause hear-

ing loss.

 Use auxiliary handle(s), if supplied with the tool. Loss

of control can cause personal injury.

 Hold the tool by the insulated gripping surfaces when

performing operations where the application tool or

the screw could contact hidden wiring or its own power

cord. Contact with a “live” wire will also make exposed

metal parts of the power tool “live” and shock the operator.

 Use suitable detectors to determine if utility lines are

hidden in the work area or call the local utility company

for assistance. Contact with electric lines can lead to fire

and electric shock. Damaging a gas line can lead to explo-

sion. Penetrating a water line causes property damage or

may cause an electric shock.

 When working with the machine, always hold it firmly

with both hands and provide for a secure stance. The

power tool is guided more secure with both hands.

 Secure the workpiece. A workpiece clamped with clamp-

ing devices or in a vice is held more secure than by hand.

 Always wait until the machine has come to a complete

stop before placing it down. The tool insert can jam and

lead to loss of control over the power tool.

Products sold in GB only: Your product is fitted with a

BS 1363/A approved electric plug with internal fuse (ASTA

approved to BS 1362).

If the plug is not suitable for your socket outlets, it should be

cut off and an appropriate plug fitted in its place by an author-

ised customer service agent. The replacement plug should

have the same fuse rating as the original plug.

The severed plug must be disposed of to avoid a possible

shock hazard and should never be inserted into a mains sock-

et elsewhere.

Products sold in AUS and NZ only: Use a residual current de-

vice (RCD) with a rated residual current of 30 mA or less.

Product Description and Specifica-

tions

Read all safety warnings and all instruc-

tions. Failure to follow the warnings and in-

structions may result in electric shock, fire

and/or serious injury.

While reading the operating instructions, unfold the graphics

page for the machine and leave it open.

Intended Use

The machine is intended for hammer drilling in concrete,

brick and stone, as well as for light chiselling work. It is also

suitable for drilling without impact in wood, metal, ceramic

and plastic. Machines with electronic control and right/left ro-

tation are also suitable for screwdriving.

Product Features

The numbering of the product features refers to the illustra-

tion of the machine on the graphics page.

1 SDS-plus tool holder

2 Dust protection cap

3 Locking sleeve

4 Lock ring of the tool holder

5 Mode selector switch

6 Vibration damper

7 On/Off switch

8 Rotational direction switch

9 Button for depth stop adjustment

10 Auxiliary handle (insulated gripping surface)

11 Depth stop

12 Handle (insulated gripping surface)

13 Quick change keyless chuck*

14 Front sleeve of the quick change keyless chuck*

15 Retaining ring of the quick change keyless chuck*

16 Extraction sleeve of the dust extraction attachment*

17 Clamping screw for the dust extraction attachment*

18 Depth stop of the dust extraction attachment*

19 Telescopic pipe of the dust extraction attachment*

20 Wing bolt of the dust extraction attachment*

21 Guide pipe of the dust extraction attachment*

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

Technical Data

Rotary Hammer GBH 4-32 DFR

Article number

3 611 C32 0..

3 611 C32 1..

Rated power input

W900

Speed

min

-1

0–760

Impact rate

min

-1

0 –3600

Impact energy per stroke

according to

EPTA-Procedure 05/2009

J4.2

Chisel positions

Tool holder

SDS-plus

Lubrication

Central permanent

lubrication

Max. drilling dia.

– Concrete (with twist drill)

– Brickwork (with core bit)

– Steel

– Wood

Weight according to

EPTA-Procedure 01/2003

kg 4.7

Protection class

/II

The values given are valid for a nominal voltage [U] of 230 V. For differ-

ent voltages and models for specific countries, these values can vary.

OBJ_BUCH-337-007.book Page 13 Monday, December 2, 2013 12:32 PM

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBH 4-32 DFR Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GBH 4-32 DFR Professional Manual

Product: