78424

Bosch GBH 36 V-LI Manual

33
Zoom out
Zoom in
Previous page
1/38
Next page
32
English
11. Connect table saw to a dust collecting device when
sawing.
12. Always use push-sticks to feed the workpiece past
the saw blade.
13. Always use and correct adjustment of the riving
knife.
14. Always use and correct adjustment of the saw blade
guard.
15. Always take care when slotting.
16. Start cutting only after motor revolution reaches
maximum speed.
17. Promptly cut OFF the switch when abnormality
observed.
18. Shut off power and wait for saw blade to stop before
servicing or adjusting tool.
SPECIFICATIONS
STANDARD ACCESSORIES
(1) 255 mm TCT Saw blade (mounted on tool) ............. 1
(2) Extension Wing ......................................................... 2
(3) Set Plate ..................................................................... 4
(4) Wrench ....................................................................... 2
(5) Hex. Wrench ............................................................... 1
(6) Elbow ........................................................................... 1
(7) Push Stick .................................................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
(1) Table Saw Stand
Optional accessories are subject to change without
notice.
APPLICATION
⅜ Wood (hard or soft woods)
UNPACKING
⅜ Carefully unpack the power tool and all related items
(standard accessories).
⅜ Check carefully to make certain all related items
(standard accessories) are present.
PRIOR TO OPERATION
1. Power source
Ensure that the power source to be utilized conforms
to the power requirements specified on the product
nameplate.
2. Power switch
Ensure that the power switch is in the OFF position.
3. Grounding instructions
This tool is equipped with an electric cord having an
equipment-grounding conductor and a grounding
plug. The plug must be plugged into a matching outlet
that is properly installed and grounded in accordance
with all local codes and ordinances.
Do not modify the plug provided - if it will not fit the
outlet, have the proper outlet installed by a qualified
electrician.
Improper connection of the equipment-grounding
conductor can result in a risk of electric shock.
The conductor with insulation having an outer surface
that is green with or without yellow stripes is the
equipment-grounding conductor.
If repair or replacement of the electric cord or plug is
necessary, do not connect the equipment-grounding
conductor to a live terminal.
4. Extension cord
When the work area is removed from the power
source, use an extension cord of sufficient thickness
and rated capacity. The extension cord should be kept
as short as practicable.
Use only three-wire extension cords which accept the
tool’s plug.
Replace or repair damaged or worn cord immediately.
PREPARATION BEFORE OPERATION
1. Installation
The table saw must be properly secured to a sturdy
workbench, stand or cabient.
(1) Secure the four set plates to the saw base at its four
corners with four 8 × 20 mm bolts (with/washers) and
four 8 mm nuts (Fig. 1).
(2) Place the table saw in the desired location.
Trace hole positions on the four set plates on the
workbench, stand or cabinet with a pencil or the like
(Fig. 3).
(3) Remove the table saw, and locate a 279 mm or 305
mm square centered between the marks locating the
body shell. Cut out and remove the square. This
opening allows sawdust to fall out of the body shell
(Fig. 3).
Max. Cutting
Capacity
Height
0° 76 mm
Bevel 45° 63 mm
Saw Blade Diameter 255 mm
Bevel Cutting Angle Left 0° ~ 45°
Input 230V–, 6.5A, 1430 W*
No-Load Speed 5000/min
Machine Dimensions (Width × Depth × Height) 870 mm × 770 mm × 486 mm
Weight (Net) 28 kg
* Be sure to check the nameplate on product as it is subject to change by areas.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBH 36 V-LI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBH 36 V-LI in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 16,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info