Manual Bosch GBH 2 S Professional (page 17 of 22) (German, Portuguese, Spanish)

591859

Zoom out

Zoom in

1/22

operate this machine.

• Bosch can ensure flawless functioning of the

machine only when original accessories are used.

Changing the tool

Before any work on the machine itself, pull the

mains plug.

With the SDS-plus tool holder, simpler and

easier tool changing is possible with-out

additional aids.

The SDS-plus tool is designed to be freely

movable. This causes eccentricity when the

appliance is off-load.

However, the drill automatically centres itself during

operation.

This does not affect drilling precision.

Take care that the dust protection cap 1 is not

damaged when changing tools.

SDS-PLUS TOOLS

Inserting:

Clean and lightly oil the tool before inserting.

Insert the dust-free tool into the tool holder with

twisting until it latches. The tool locks itself.

Check the locking by pulling on the tool.

Removing:

Pull the locking sleeve 2 to the rear and hold while

removing the tool.

TOOLS WITHOUT SDS-PLUS

Do not use tools without SDS-plus for hammer

drilling or chiseling!

Steel, wood and plastic can be drilled with the ring

gear chuck (accessory) and the corresponding

adapter (accessory). (Fig. M ).

Twist the mounted dust-free drill chuck into the tool-

holding fixture and push in until it engages. The

chuck locks automatically. Pull on the drill chuck to

check that it is locked. (Fig. N ).

Set the impact stop switch 7 to Drilling (only

activate when the drill is at a standstill).

Srewdriver Bits GBH2-24 DSR (Fig. O ).

For screwdriver bits, use the SDS-plus adapter 13

(optional accessory).

Before use

Before starting work always examine the

working area for concealed electric lines,

gas and water pipes, e. g. with a metal

detector.

Always use the correct supply voltage.

The voltage of the power source must agree with the

information on the nameplate of the ma-chine.

Machines for 230 V can also be used on 220 V

power sources.

The power cord and plug must be in perfect

condition.

Auxiliary handle

For safety reasons, the percussion drill may only

be operated using the auxiliary handle 5.

Rotating the auxiliary handle 5 to the desired position

reduces operator fatigue and enables the operator to

adopt a safe stance (Fig. P ).

To rotate the auxiliary handle 5, first release the

handle by turning it counter-clockwise.

Then retighten the auxiliary handle 5.

DEPTH STOP (Fig. Q ).

Loosen the winged screw 14 on the auxiliary handle

5. Adjust the drilling depth stop t on the depth stop 4.

Retighten the winged screw.

Putting into operation

Temporary operation

• On: Press On/Off switch 8.

• Off: Release On/Off switch.

Continuous operation

• On: Press On/Off switch 8 and engage inter-lock 9.

• Off: Press On/Off switch 8 and release.

GBH 2-24 DSR: For reasons of safety, on/off switch

8 cannot be locked with locking button 9 in left

rotation.

Speed control (GBH 2-24 DSE / DSR)

Speed can be adjusted during operation by

increasing or decreasing the pressure on the On/Off

switch 8.

This enables holes to be drilled slowly in smooth

surfaces, e.g. tiles, and prevents the drill from

slipping. Splitting of drilled materials can also be

avoided.

Approx. Values

• Hammer Drilling in Concrete or Stone: press the

On/Off switch 8 to the maximum position.

• Drilling in Steel or Wood: press the On/Off switch 8

to the middle position.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBH 2 S Professional in the language / languages: German, Portuguese, Spanish as an attachment in your email.

The manual is 3,59 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Bosch GBH 2 S Professional Manual

Product: