591860

Bosch GBH 2-24 DSE Professional Manual

18
Zoom out
Zoom in
Previous page
1/22
Next page
18
Setting the Direction of Rotation GBH 2-24 DSR
With the right/left rotation switch 10, the rotational
direction of the machine can be changed.
Change the direction of rotation only when the
machine is switched off! Otherwise, the machine
can be damaged.
Right rotation:
Press the right/left switch 10 to the right to the stop.
Left rotation:
Press the right/left switch 10 to the left to the stop.
Set the direction of rotation for hammer drilling and
drilling always for right rotation.
Mode selection switch
Set the impact stop switch 7 to Drilling (only
activate when the drill is at a standstill).
Press the release button 6 on the mode selector
switch 7 and move the button to the desired position.
Drilling /
Screw
Driving
Hammer
Drilling
Vario-Lock Chiselling
GBH 2 S
GBH 2 - 24 DSE
GBH 2 - 24 DSR
GBH 2 S
GBH 2 - 24 DSE
GBH 2 - 24 DSR
GBH 2 - 24 DSE
GBH 2 - 24 DSR
GBH 2 - 24 DSE
GBH 2 - 24 DSR
The following table shows how the mode selection
switch 7 as well as the On/Off switch 8 for regulation
the speed (GBH 2-24 DSE) are to be set for the
various operating modes (see illustrations on the
fold-out page).
Operating mode GBH
2-S 2-24 DSE 2-24DSR
Hammer drilling in
Concrete or stone Fig. A Fig. C Fig. G.
Drilling in steel or wood Fig. B Fig. D Fig. H.
Screw driving
Right rotation - Fig. E Fig. I.
Left rotation - - Fig. J.
Chiseling - Fig. F Fig, K.
Setting the chisel position (VARIO-LOCK)
The percussion drill (GBH 2-24 DSE /
DSR) is suitable for light-duty chiseling
work. Operator fatigue can be avoided by
rotating the tool (e.g. flat chisel) to the
optimum position for use. The tool mount
can be set to 36 different positions.
Always wear protective gloves!
Insert the tool into the tool mount.
Press release button 6 and turn the mode selector
switch 7 to Chisel adjustment. (Fig. L ) When the
mode selector switch is in the Vario-lock position, the
tool mount can be rotated to the desired position.
To fix the tool mount in position, turn the mode
selector switch until it engages in the Chiseling
setting.
Always set the mode selector switch 7 to
Chiseling when carrying out chiseling.
Overload clutch
If the drill becomes caught or jammed, the drive to
the drill spindle is interrupted.
Because of the forces that occur as a result, always
hold the machine securely with both hands and take
a firm stance.
Sharpening chisels
Since good results can only be achieved using sharp
chisels, it is important to sharpen tools in good time.
This prolongs the life drilling depth. As a result the
vacuum attachment head always of your tools and
ensures high efficiency.
Grind chisels using grinding wheels (e.g. corundum).
Keeping the chisels wet using a steady supply of
water. Refer to the drawings below for recommended
values. Make sure that no annealing colour appears
on the cutting edges, otherwise the hardness of the
chisel will be impaired (Fig. R , S , T ).
Dust extraction
Dust extraction prevents large accumulations of dust,
high concentrations of dust in the ambient air and
facilitates disposal.
The appliance can be plugged directly into the
socket of a Bosch all-purpose vacuum cleaner which
incorporates a remote control Saugfix start device.
Attach vacuum attachment (accessory) and connect
the vacuum cleaner. The vacuum attachment springs
back as far as the preset drilling depth. As a result
the vacuum attachment head always remains close
to the surface.
Maintenance and cleaning
Before any work on the machine itself, pull the
mains plug.
For safe and proper working, always keep
the machine and the ventilation slots clean.
Clean the tool holder daily.
Replacing the Dust Protection Cap
Replace the dust protection cap 1 without delay if it
is damaged. A damaged dust protection cap can
allow dust to penetrate into the tool holder and lead
to malfunctions.
Have the replacement of the dust protection cap
performed by a customer service agent.
In extreme working conditions, conductive
dust can accumulate in the interior of the
machine when working with metal. The
protective insulation of the machine can be
de-graded. The use of a stationary extraction
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBH 2-24 DSE Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBH 2-24 DSE Professional in the language / languages: German, Portuguese, Spanish as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info