786463
15
Zoom out
Zoom in
Previous page
1/185
Next page
English | 15
To switch off the power tool, push the on/off switch(6)
back down (0) and release it.
For low temperatures, the power tool reaches the full ham-
mer/impact capacity only after a certain time.
Changing the chiselling position (Vario-Lock)
You can lock the chisel in 16 different positions, allowing
you to select the optimum working position for each task.
Insert the chisel into the tool holder.
Turn the mode selector switch(3) to the "drilling" posi-
tion.
Turn the application tool to the required chisel position.
Turn the mode selector switch(3) to the "chiselling" posi-
tion. With this, the tool holder is locked.
Adjusting the Speed/Impact Rate
The electronic control enables continuous speed and impact
rate preselection for material-specific adjustments.
Select the impact rate with the thumbwheel (7) according
to the material.
The information in the table below describes the recommen-
ded values.
Application Thumbwheel
position
Working on plaster/light building materials
1
6
Removing tiles
Working on brick
Working on concrete
Practical Advice
Overload clutch
uIf the application tool jams or snags, the power trans-
mission to the drill spindle will be interrupted. Always
hold the power tool firmly with both hands to with-
stand the forces this may create and adopt a position
with stable footing.
uSwitch the power tool off immediately and remove the
application tool if the power tool becomes blocked.
Switching on when the drilling tool is blocked may
cause high torque reactions.
Vibration damping
GBH12-52DV
The integrated vibration damping function re-
duces the generated vibration.
uDo not continue to use the power tool if the damping
element is damaged.
Sharpening Chisels
Only sharp chiselling tools will produce good results, there-
fore sharpen your chiselling tools in good time before use.
This will ensure a long service life for the tools and good
work results.
Re-sharpening
Grind chiselling tools against sanding discs, e.g. aluminium
oxide, under a steady stream of water. Make sure that the
cutting edges show no annealing colours; this will impair the
hardness of the chiselling tools.
To forge a chisel, heat it to 850–1050 °C (pale red to yel-
low).
To harden a chisel, heat it to approx. 900 °C and quench in
oil. Then, leave it in an oven for approx. one hour at 320 °C
(annealing colour: pale blue).
Maintenance and Service
Maintenance and Cleaning
uPull the plug out of the socket before carrying out any
work on the power tool.
uTo ensure safe and efficient operation, always keep
the power tool and the ventilation slots clean.
In order to avoid safety hazards, if the power supply cord
needs to be replaced, this must be done by Bosch or by an
after-sales service centre that is authorised to repair Bosch
power tools.
uReplace a damaged dust protection cap immediately.
It is recommended that you have use an after-sales
service for this.
Clean the tool holder after each use.
Service indicator
When the carbon brushes are worn out, the power tool
switches itself off. This is indicated approx. 8 hours before-
hand by the service indicator(8) lighting up or flickering.
The power tool must be sent to customer service for main-
tenance. For addresses, see: (see "After-Sales Service and
Application Service", page15)
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
Bosch Power Tools 1 609 92A 747 | (25.05.2022)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GBH 12-52 DV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GBH 12-52 DV in the language / languages: All languages as an attachment in your email.

The manual is 4.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info