594765
9
Zoom out
Zoom in
Previous page
1/192
Next page
English | 9
Bosch Power Tools 1 609 92A 0X8 | (29.7.14)
sponsible for their safety supervis-
es them or has instructed them in
the safe operation of the vacuum
cleaner and they understand the
associated dangers. Otherwise,
there is a danger of operating errors
and injuries.
Supervise children. This will ensure
that children do not play with the vac-
uum cleaner.
Cleaning and user maintenance of
the vacuum cleaner shall not be
made by children without supervi-
sion.
Do not vacuum dust from beech or oak wood, masonry
dust or asbestos. These materials are considered carcino-
genic.
Use the vacuum cleaner only after hav-
ing received sufficient information on
the usage of the vacuum cleaner, the materials to be vac-
uumed and their safe disposal. A thorough introduction re-
duces operating errors and injuries.
The vacuum cleaner is suitable for vac-
uuming dry materials and, by taking
suitable measures, also for vacuuming liquids. The pene-
tration of liquids increases the risk of an electric shock.
Do not vacuum inflammable or explosive fluids; for ex-
ample, benzene, oil, alcohol, solvents. Do not vacuum
hot or burning dust. Do not operate the machine in
rooms where the danger of an explosion exists. The
dusts, vapours or fluids can ignite or explode.
Use the socket only for the purposes
specified in the operating instructions.
Switch the vacuum cleaner off immedi-
ately as soon as foam or water comes
out, and empty the container. Otherwise, the vacuum clean-
er can become damaged.
The vacuum cleaner may only be
used and stored indoors. The pene-
tration of rain or moisture into the vacuum cleaner lid increas-
es the risk of an electric shock.
Clean the float at regular intervals,
and check it for damage. Otherwise,
its function can be impaired. (see Fig. 14, page 189191)
When operating the vacuum cleaner in damp environ-
ments, use a residual current device (RCD). Using a re-
sidual current device (RCD) reduces the risk of an electric
shock.
Connect the vacuum cleaner to a properly earthed
mains supply. The socket outlet and the extension cable
must have an operative protective conductor.
Before each use, check the vacuum cleaner, cable and
plug. Do not use the vacuum cleaner when defects are
detected. Do not open the vacuum cleaner yourself and
have it repaired only by qualified personnel using orig-
inal spare parts. Damaged vacuum cleaner, cables and
plugs increase the risk of an electric shock.
Do not drive over, crush or stretch the cable. Do not
pull the cable to unplug the plug from the socket outlet
or to move the vacuum cleaner. Damaged cables in-
crease the risk of an electric shock.
Before maintaining or cleaning the vacuum cleaner,
making any adjustments, changing accessories or plac-
ing the vacuum cleaner aside, remove the plug from the
socket outlet. This safety measure prevents accidental
starting of the vacuum cleaner.
Provide for good ventilation at the working place.
Have the vacuum cleaner repaired only through quali-
fied specialists and only using original spare parts. This
ensures that the safety of your vacuum cleaner is main-
tained.
The vacuum cleaner contains materials
that are hazardous to one’s health.
Have the emptying and maintenance, incl. the disposal of
dust-collection containers, carried out only by specialists.
Appropriate protective equipment is required. Do not op-
erate the vacuum cleaner without the complete filter sys-
tem. Otherwise there is danger to your own health.
Before restarting, check the proper condition of the
vacuum hose. When doing this, leave the vacuum hose
mounted to the vacuum cleaner to prevent dust from
coming out. Otherwise, you could possibly inhale dust.
Do not use the vacuum cleaner as a seat. The vacuum
cleaner could become damaged.
Use the mains cable and the
vacuum hose carefully.
Other persons could be harmed.
Do not clean the vacuum cleaner with a water jet point-
ed directly at it. The penetration of water into the vacuum
cleaner lid increases the risk of an electric shock.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Products sold in AUS and NZ only: Use a residual current de-
vice (RCD) with a rated residual current of 30 mA or less.
WARNING
WARNING
WARNING
WARNING
WARNING
OBJ_BUCH-1321-006.book Page 9 Tuesday, July 29, 2014 11:53 AM
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GAS 20 L SFC Professional at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GAS 20 L SFC Professional in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 38,84 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info