786181
14
Zoom out
Zoom in
Previous page
1/140
Next page
14 | English
Switching on/off
To switch on the vacuum cleaner, press the on/off
button(3).
To switch off the vacuum cleaner, press the on/off
button(3) again.
Maintenance and Service
Maintenance and Cleaning
uRemove the battery before cleaning or performing
maintenance on the dust extractor, making tool ad-
justments, changing accessories or placing the dust
extractor in storage. This safety measure prevents the
dust extractor from being started accidentally.
uTo ensure safe and efficient operation, always keep
the dust extractor and the ventilation slots clean.
Clean the housing of the dust extractor occasionally with a
damp cloth.
Clean dirty charging pins using a dry cloth.
Emptying the Dust Container (seefigureC)
Clean the dust container (6) after each use in order to en-
sure that the vacuum cleaner continues to perform optim-
ally.
Hold the dust extractor over a suitable waste bin.
Press the release button(7) to open the emptying
flap(8).
Shake out the dust container(6).
Close the emptying flap(8) in such a way that you can
hear it click into place.
If necessary, empty the coarse dirt filter(1) and clean the
rotational airflow unit(17) as well as the filter(16).
Emptying the Coarse Dirt Filter (seefiguresD1–D2)
Turn the coarse dirt filter(1) as far as it will go in the dir-
ection and remove it from the dust container(6).
Shake out the coarse dirt filter and the dust container
over a suitable waste bin.
Place the coarse dirt filter(1) in the dust container(6)
and turn it as far as it will go in the direction .
Cleaning the Rotational Airflow Unit and Filter
(seefiguresE1–F2)
Hold the dust extractor down slightly as shown so that
dust cannot fall out of the dust container when the dust
extractor is opened.
Press the release button(2) and remove the dust
container(6) from the motor housing(5) (see figureE1).
Hold onto the filter grips(15) and pull the rotational air-
flow unit(17) with the filter(16) out of the dust
container(6) (see figureE2).
Shake out the dust container(6) and the rotational air-
flow unit(17) over a suitable waste bin (see figureE3).
Put the rotational airflow unit(17) and filter back in the
dust container(6).
Push the locking tab(18) up and remove the filter(16)
(see figuresF1F2).
Gently tap the filter against a solid surface to loosen the
dust. Replace any damaged filters.
Insert the cleaned filter(16) into the rotational airflow
unit(17).
Attach the dust container(6) at the bottom in the motor
housing(5). Apply slight pressure to the dust container to
allow it to click into place in the motor housing.
Storage (see figure G)
You can use the wall bracket(19) (accessory) to save space
when storing the dust extractor and extractor accessories.
Faults
Regularly empty the dust container(6) and coarse dirt
filter(1) and regularly clean the rotational airflow unit(17)
and filter(16) for optimum suction power.
If the suction power is insufficient, check:
Is the dust container (6) full?
▷Empty the dust container.
Is the coarse dirt filter(1) clogged with dust?
▷Empty the coarse dirt filter.
Is the rotational airflow unit(17) or the filter(16) clogged
with dust?
▷Clean the rotational airflow unit and the filter.
Is the capacity of the rechargeable battery(4) insuffi-
cient?
▷Charge the rechargeable battery.
If sufficient suction power is not achieved after following
these steps, please contact a Bosch customer service agent.
After-Sales Service and Application Service
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. You can find explosion drawings and information on
spare parts at: www.bosch-pt.com
The Bosch product use advice team will be happy to help you
with any questions about our products and their accessor-
ies.
In all correspondence and spare parts orders, please always
include the 10‑digit article number given on the nameplate
of the product.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0344) 7360109
E-Mail: boschservicecentre@bosch.com
You can find further service addresses at:
www.bosch-pt.com/serviceaddresses
1 609 92A 7MU | (17.05.2022) Bosch Power Tools
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GAS 18V-1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GAS 18V-1 in the language / languages: All languages as an attachment in your email.

The manual is 3.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info