544359
223
Zoom out
Zoom in
Previous page
1/246
Next page
Bosch Power Tools 1 609 929 T80 | (17.4.09)
中文 | 223
安裝加長件測量 ( 參考插圖 FH)
必須在儀器上安裝加長件 3 以方便測量。如果儀器的放置面長度比
折疊臂 1 短時。
安裝好加長件 3 (參考 " 安裝加長件 ", 頁數 221)。把主臂 4 和加長
件平放或者靠在測量邊緣上。
此時顯示屏上出現的測量值,即為主臂和折疊臂之間的角度 w。您
可以參考以下的運算方法,算出主臂和加長件之間的角度 v:
v = 180
w
操作模式 " 單斜切角 "
操作模式 " 單斜切角 " ("Simple MTR") 可以行切割角 "MTR" 的運
算,使用時機是當您想組合兩塊有相同斜切角的工件,而該工件組
合後的外角角度 x 小於 180 (例如針對地板的修邊木條、樓梯
上的柱子或相框等)
如果要在角落組合兩個工件 (例如地板的修邊木條),得把主臂和折
疊臂靠在角落上測量角度 x 如果是指定好的角度 (例如相框),那
麼要打開主臂和折疊臂至指定的角度 出現在儀器的顯示屏上為止。
運算出來的是水平斜切角 "MTR" ("Miter Angle": 水平斜切角 ),也就
是必須從兩個工件上切除的角度。鋸割此斜切角時,鋸刀必須和工
件垂直 (垂直的斜切角是 0 )
按下按鍵 10,至少按住 1 秒鐘。接著顯示屏上會出現計算出來的水
平斜切角 "MTR" (即隨后要在介鋁機上設定的斜切角值),以及指
示燈 "MTR"
測量所得或者設定的外角角度如果 x 大于 180 在按下按鍵 10
2 秒鐘之后,顯示屏上會出現錯誤訊號 "
––––",接著儀器會轉換
" 基本測量 " 的操作模式。
輕按按鍵 10,不可以超過 1 秒鐘,以便從 " 單斜切角 " 的操作模式
回到 " 基本測量 " 的操作模式。.
指示﹕ 計算出來的水平斜切角 "MTR" 能夠直接使用在介鋁機上,前
提是介鋁機的垂直切角必須設定在 0 度上。 如果介鋁機的垂直切角
被設定為 90 度,則必須采用以下的運算方式換算鋸割的角度 :
90
儀器顯示的角度 "MTR" = 必須在電鋸上設定的角度。
x
˚
x
˚
MTR
MTR
MTR
MTR
OBJ_BUCH-958-001.book Page 223 Friday, April 17, 2009 10:26 AM
223


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Bosch GAM 220 MF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Bosch GAM 220 MF in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 15,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info